1) Al electrode
铝电极
1.
Al electrode is well known as an ohmic contact electrode for the PTC component, However its printing and firing process is very difficult to control .
以In/Ga电极作为参考电极,研究讨论了铝电极厚度对最终PTC元件性能的影响,并得出了最佳厚度参数。
2) aluminum electrode
铝电极
1.
The aluminum electrodes were chosen and the removal efficiencies of chlorophyll-a,UV254 and turbidity were discussed during different current,conductivity and pH conditions.
采用铝电极,研究了不同电流密度、电导率和pH条件下,电凝聚-气浮工艺对浊度、叶绿素a、UV254的去除效率,并与常规混凝处理效果进行了当量比较。
3) aluminum foil
铝电极箔
1.
Film composition and percentage of atom were analyzed by XPS,voltage-time response of aluminum foil during anodizing was followed,dielectric constant of composite films was calculated in theory,and capacitance and durability of aluminum electrolytic capacitors was.
监测铝电极箔恒电流阳极氧化过程中的升压曲线,对复合氧化膜的介电常数进行理论计算,并测试铝电解电容器的容量及耐久性。
2.
Anode aluminum foil is the key material for manufacturing aluminum electrolytic capacitors, and the size and application of aluminum electrolytic capacitors strongly depend on the properties of the anodic oxide film formed on which.
本文首先综述了国内外铝电极箔比容提高技术的研究进展,之后详细论述了络合沉积一阳极氧化法形成高介电常数的Al_2O_3-Nb_2O_5复合氧化膜及Sol-gel法分别制备Al_2O_3-BST及Al_2O_3-BT复合氧化膜的技术方法,并借助于SEM、XPS、XRD等分析手段对复合氧化膜的结构和成分进行了分析。
4) aluminium electrode arm
铝电极臂
5) Capacitance
[英][kə'pæsitəns] [美][kə'pæsətṇs]
铝电极箔
1.
Study on the Technology and Mechanism of Manufacturing Aluminum Electrolytic Capacitor Foils with High Capacitance;
高比容铝电极箔制造技术及其机理研究
6) zinc-aluminum electrode
锌铝电极
1.
On the basis of the dual-aluminum electrode,the zinc-aluminum electrode was designed by introducing zinc electrode.
在双铝极板电絮凝法的基础上引入锌电极,考察锌铝电极电絮凝法对高氟饮用水的除氟效果。
补充资料：135kA中间下料预焙阳极铝电解槽(抚顺铝厂)
135kA中间下料预焙阳极铝电解槽(抚顺铝厂)
赢 135kA中间下料预焙阳极铝电解槽(抚顺铝厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条