1) copper rotating band
铜弹带
1.
It is successful to re-melt deposit pure copper rotating band on D-30 shell body by using the process.
本研究探索了一种新的焊接工艺方法—熔敷扩散焊接方法 ,采用该方法在 30口径弹体上焊接纯铜弹带取得成功。
2.
It is successful to re melt deposit pure copper rotating band with D 30 shell body by using the process.
研究了一种新的焊接工艺方法——熔敷焊接方法 ,采用该方法在 3 0 mm口径弹体上焊接纯铜弹带取得成功 。
2) copper strip
铜带
1.
Research and manufacture of high accuracy copper strip rolling line;
高精度铜带轧制生产线设备的研制
2.
Formation mechanism and elimination of the lateral polishing markings on copper strip surface;
铜带表面抛光横纹的成因分析和对策
3.
Market analysis of domestic lead-in frame copper strips;
国内引线框架铜带市场分析
3) copper sheet
铜带
1.
According to hydrophile-lipophile balance(HLB ) theory,a kind of novel emulsion(CO-1),applied to the experiment cold rolled copper sheet,was developed by controlling of the compositions of emulsion,such as base oil,emulsifying reagent,extreme pressure,anti-wear reagent,antirust and so on.
根据亲水亲油平衡理论,通过选择合适的基础油、乳化剂、极压剂、抗磨剂、防锈剂等添加剂,研制了适用于冷轧铜带所需的CO-1冷轧乳化液,并成功地应用于冷轧铜带工业实验。
2.
The influence of sulfur-containing and phosphorous-containing additives on the extreme pressure lubrication properties of emulsions used in copper sheets cold rolling process was studied by four-ball friction test and rolling experiments.
通过四球摩擦实验和轧制实验,研究了硫系和磷系极压剂对铜带冷轧乳化液极压润滑性能的影响。
3.
A novel emulsion(CO-1) for copper sheet cold rolling is prepared by optimal selection of the components of emulsion,such as base oil,emulsifying agent,extreme-pressure agent,anti-wear agent,anti-rust agent and other additives,and applied to copper sheet cold rolling production.
选择合适的基础油、乳化剂、极压剂、抗磨剂、防锈剂等添加剂,研制适用于冷轧铜带所需的CO-1冷轧乳化液,应用于冷轧铜带生产。
4) copper band
铜带
1.
Aiming at shortcoming of machining copper band, the method of cladding copper band using metal inert-gas arc brazing was investigated.
针对机械加工制成铜带的不足之处采用MIG钎焊方法堆焊铜带。
5) strip copper
铜带，铜条
6) band
[英][bænd] [美][bænd]
弹带
1.
This paper establishes a mathematical model of melt-lubrication between band and gun tube with oil on the bore interface.
该文就火炮内膛涂油条件下,弹丸在膛内高速运动中的弹炮接触熔化进行了分析,建立了涂油条件下的弹炮接触熔化热流体模型,进行了数值计算,计算了弹带熔化速度和厚度及其对弹丸摩擦系数的影响,结果与实验值吻合较好。
2.
This paper takes MC nylon band for use in APFSDS in smooth gun as study,analyses its requirement of the material property and decision on target and practical application,points out some problems of needing solution,puts forward a thought of establishing an uniform and professional standard.
文中以滑膛炮脱壳穿甲弹所使用的 MC 尼龙弹带为研究对象,就其材料性能要求、指标确定和实际应用进行了分析,指出了尚需解决的问题,提出了建立统一的行业标准的思想。
3.
The dynamic stresse in sabot and band and band pressure of a certain kind of projectile during launch period were found using an“Automatic Dynamic Increase Non-linear Analysis Code”,The effects of thesizes of nylon band on the stresses distributions in sabot were calculated andanalysed.
应用“自动动态增量非线性分析”程序，计算了某高初速杆式穿甲弹在发射初期，当弹带为尼龙、铜质等不同材料时，弹内动态应力和弹带压力变化情况；并就尼龙弹带前倾角的变化对应力分布的影响作了计算分析，确定了尼龙弹带在给定尺寸情况下的弹带压力分布、弹带变形情况等，最后就几种情况作了较详细的分析探讨。
补充资料：半硬壳式弹体(见弹道导弹弹体)
半硬壳式弹体(见弹道导弹弹体)
semi-hard-shelled missile body
bQn yingkeshi dan桩半硬壳式弹体(semi一hard一shelled、ssilebody)见弹道导弹弹体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条