1) liquid extrusion
液态挤压
1.
Analysis on flow velocity and equivalent strain of the metal in the process of liquid extrusion;
液态挤压过程中金属流动速度与等效应变的分析
2.
Numerical simulation of infiltration process in liquid extrusion for fabrication of Al_2O_3f /LY12 composites;
液态挤压制备Al_2O_(3f)/LY12复合材料浸渗过程的数值模拟
3.
Using liquid extrusion to manufacture the aluminum-alloy grip, taking the place of hot die forging, can greatly increase the material utilization rate, reduce the processing procedures and lower the product cost.
采用液态挤压代替热模锻生产铝合金钳柄体 ,可显著提高材料利用率、减少成形工序及降低产品成本。
2) liquid state squeezing die
液态挤压模具
1.
Several common heat treatment processes of aluminium alloy liquid state squeezing die in nation are studied.
研究了国内铝合金液态挤压模具的几种常规热处理工艺,论述了3Cr2W8V模具截面工作时的温度分布、热处理后的硬度及使用寿命的关系。
3) Liquid Infiltration-Extrusion
液态浸渗挤压
1.
The FEM Simulation of the Liquid Infiltration-Extrusion Process Including Damage for Composites;
复合材料液态浸渗挤压有限元模拟及损伤研究
2.
The FEM Simulation of the Liquid Infiltration-Extrusion Process for Composites;
复合材料液态浸渗挤压过程的有限元模拟
3.
Research on the FEM Simulation of the Liquid Infiltration-Extrusion Process for Fabricating MMC;
液态浸渗挤压复合材料过程的有限元模拟
4) hydro-extrusion
液压挤压
5) hydrostatic extrusion
静液挤压
1.
Study on hydrostatic extrusion technology of W6Mo5Cr4V2 high speed steel;
静液挤压W6Mo5Cr4V2高速钢的工艺研究
2.
Experiments and simulation study on hydrostatic extrusion processes of magnesium alloy silk;
镁合金丝静液挤压物理模拟实验与数值模拟分析
3.
Deformation behavior and structure of Zr base bulk amorphous alloy in supercooled liquid region by hydrostatic extrusion;
Zr基非晶合金在过冷液相区静液挤压的变形行为及结构
6) liquid-solid extrusion
液固挤压
1.
A real-time monitoring system is developed,which is aiming at the difficulties of controlling liquid-solid extrusion process and the key parameters.
针对液态浸渗挤压复合材料成形过程实施难度大、工艺参数和成形过程难以控制的现存问题,以PCI数据采集控制卡为核心,采用LabVIEW软件设计开发了工艺实时监控系统;实现了对工艺过程中重要参数的在线采集、显示与存储,利用该监控系统进行液固挤压复合材料实验,基本实现了对温度等关键工艺参数的过程控制;实验结果表明了该系统的可靠性,从而为真空吸渗挤压复合材料工艺的实际应用奠定了基础。
补充资料：液态挤压
液态挤压
liquid state extrusion
yetoiJ一ya液态挤压(liquid state extrusion)将液态金属注入一端被封闭的挤压筒内直接挤压成形的金属塑性加工方法。液态金属挤压主要是在立式挤压机(见图)上进行，同固态金属挤压相比较可省力、节能。通常应用于电缆外皮包铅及生产电工用保险丝。沁 液态金属挤压 1一模;2一挤压筒;于一挤压杆;4一芯棒 (温景林)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条