1) semi_shaft spur conical gear
半轴直齿圆锥齿轮
1.
It was turned out that control on the die flash height is a simple and effective way for extending the service life of the fine forging die for semi_shaft spur conical gears.
论述了模具飞边高度的调整对锻造冲击力、模膛内部压力、齿形模大端变形和锻件实际飞边厚度增加产生的影响 ,得出控制模具飞边高度是简单、有效地提高半轴直齿圆锥齿轮精锻模具使用寿命的方法 ,在生产中得到较好的应
2) spur bevel gear
直齿圆锥齿轮齿
1.
Finite element analysis on the dynamic stress at the tooth root of a spur bevel gear
直齿圆锥齿轮齿根动应力有限元分析
3) bevel pinion shaft
圆锥齿轮轴
4) straight bevel gear
圆锥直齿轮
1.
Machining straight bevel gear by gear-hobbing machine;
用滚齿机加工圆锥直齿轮
2.
In this paper, the problem of contour skim of hardened large module straight bevel gears is solved with carbide indexable contour gearshaping tool.
本文利用硬质合金可转位仿形刨刀,解决了大模数硬齿面圆锥直齿轮的仿形刮削加工问题。
5) semi-axle bevel gear
半轴锥齿轮
1.
A new precision forming technology was presented,which uses an ordinary forging machine and a high precision rotary forging machine to make the closed-tolerance semi-axle bevel gear forgings.
提出了采用普通锻压设备进行坯料准备、高精度冷摆辗机成形半轴锥齿轮精锻件的成形新工艺,研究了成形工步的坯料形状、成形工艺参数、模具结构以及精锻件后续加工的工装夹具结构等一系列技术问题。
6) straight tooth bevel gear
直齿圆锥齿轮
1.
Finite element analysis of maximum rolling pressure of rotary roll forming for straight tooth bevel gear;
直齿圆锥齿轮摆辗成形最大辗压力的有限元研究
2.
The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed,and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式,并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟,探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
3.
Through to skewed tooth bevel gear bending stress and contact stress analysis,and comparison with the straight tooth bevel gear,summarizes the skewed tooth bevel gear\'s transmission characteristic,the load bearing superiority and the application prospect.
通过对斜齿圆锥齿轮弯曲应力和接触应力的分析,并与直齿圆锥齿轮进行比较,总结出斜齿圆锥齿轮的传动特点、承载优势和应用前景等。
补充资料：圆锥轴截面
Image:1173336127350375.jpg
圆锥轴截面
圆锥中，以底面直径为底，以圆锥的高为高，形成的三角形为圆锥的轴截面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。