1) china canal of high temperature
高温陶瓷管
2) High temperature Ceramics
高温陶瓷
1.
The control volume method is combined with the Monte Carlo method and spectral band model to simulate the transient coupled heat transfer of radiation and conduction in high temperature ceramics,which is submitted to aerodynamic heating.
采用控制容积法结合蒙特卡罗法与谱带模型,数值模拟了气动加热下高温陶瓷内的辐射与导热瞬态耦合换热。
2.
The thermal emission model of high temperature ceramics submitted to aerodynamic heating was developed to analyze the apparent emissivity and temperature.
建立了气动加热下高温陶瓷材料表面的辐射模型,采用控制容积法结合蒙特卡罗法模拟了不同条件下材料的温度分布与表观发射率。
3) ultra-high temperature ceramics
超高温陶瓷
1.
Thermodynamic Investigation on the Subsystems in B-C-Si-Zr-O for Ultra-high Temperature Ceramics
超高温陶瓷B-C-Si-Zr-O部分体系相关系的研究
2.
%SiC ultra-high temperature ceramics were prepared by spark plasma sintering technique(SPS).
采用放电等离子烧结工艺在1850℃烧结温度、升温速度200℃/min、保温3min、压力50MPa条件下制备了ZrB_2-20%SiC(体积分数,下同)超高温陶瓷材料。
3.
This work provided significant insight into the behaviour of ultra-high temperature oxidation of C/C composites and ultra-high temperature ceramics.
依据上述热力学数据,可以了解不同碳化物的氧活性和平衡氧分压随温度的变化规律,以及ZrC-ZrO_2和SiC-SiO_2体系氧化物蒸气压特别是界面蒸气压的大小,对于深入了解改性C/C复合材料和超高温陶瓷的超高温氧化行为,特别是对于改性C/C复合材料中有效的抗氧化添加剂的选择有理论指导意义。
4) ultrahigh temperature ceramics
超高温陶瓷
1.
Each of the three metals (Zr, Hf, W) was added into the ZrB2/ZrC/SiC ultrahigh temperature ceramics with inherent brittleness in order to improve the ductility of these ceramics.
由于ZrB2/ZrC/SiC超高温陶瓷材料具有内在的脆性,采用添加金属Me(Me=Zr、Hf、W)以提高超高温陶瓷的韧性。
2.
Two different AlN contents(5 vol%,10 vol%) of ZrB2-SiC matrix ultrahigh temperature ceramics were prepared by hot pressing sintering technigue.
采用热压烧结工艺制备了两种不同AlN含量(5 vol%,10 vol%)的ZrB2-SiC基超高温陶瓷材料,并对其微观组织与力学性能进行了考察。
5) HfB_2-based ultra high temperature ceramics
HfB_2基超高温陶瓷
6) high temperature ceramic filter
高温陶瓷过滤器
1.
The numerical calculation of gas flow in high temperature ceramic filters was performed by using the FLUENT computational fluid dynamics software.
利用FLUENT计算流体力学软件,对高温陶瓷过滤器正向流动与过滤过程进行了数值计算,得到了切向进气和径向进气时高温陶瓷过滤器内的流场分布。
补充资料：CJ-2计算机控制陶瓷材料高温蠕变试验机
CJ-2计算机控制陶瓷材料高温蠕变试验机
鲡 C」一2计算机控制陶瓷材料高温蠕变试验机 中国科学院上海硅酸生研完所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条