1) polymeric compatibilizer
大分子相容剂
1.
The application of polymeric compatibilizer in the filled polyolefin;
大分子相容剂在填充聚烯烃中的应用
2.
In recent years, the studies on the polymeric compatibilizer applied in polypropylene composites were more and more, which was use to promote the dispersion of filler in polymer matrix, improve the adhesion between filler and matrix and increase the physical and mechanical properties of polymer composites.
大分子相容剂在共混高分子材料中有着广泛的应用,并获得明显的效果。
2) macrocompatibilizer
大分子增容剂
1.
Glass fiber reinforced polypropylene composites(GFPP) modified with macrocompatibilizer,MAH-g-PP,are prepared in this study.
制备了马来酸酐接枝聚丙烯(MAH-g-PP)增容的玻璃纤维增强聚丙烯(GFPP)材料,重点考察了大分子增容剂对PP复合材料体系的力学性能影响,并对其形态进行了分析。
3) molecular biocompatibility
分子生物相容性
1.
With the rapid development of molecular biology,the methods of study the biocompatibility of bio ma te rials have been more and more diversification and their evaluation have been raised from the cell lever to molecular lever,the paper will trace back the progress of molecular biocompatibility and foresee the future.
随着分子生物学的迅速发展,生物材料生物相容性研究手段逐渐多样化,其评价已从整体、细胞水平进入了分子水平,本文将对生物材料的分子生物相容性研究的现状进行回顾和展望。
5) compatilizer
[kəm'pætilaizə]
相容剂
1.
Progress of Studies on PS/PE Plastic Alloys' Compatilizer;
聚苯乙烯/聚乙烯塑料合金相容剂的研究进展
2.
Preparation of LLDPE-g-MAH Compatilizer and Its Influence on Property of LLDPE/PA6 Blend;
相容剂LLDPE-g-MAH的制备及其对LLDPE/PA6共混性能的影响
3.
Fortunately,B 30 could be used as compatilizer to improve the miscibility of sPS/iPP blends.
结果表明sPS/iPP是不相容体系,B30与iPP可相容,B30可作为sPS/iPP共混物的相容剂。
6) compatibilizer
相容剂
1.
Application of Compatibilizers in PC/ABS Alloy;
相容剂及其在PC/ABS合金中的应用
2.
Study of Mechanical and Rheological Properties of HDPE/PC/Compatibilizer /MMT Composite;
HDPE/PC/相容剂/蒙脱土复合材料性能的研究
3.
Preparation of Compatibilizer PE-g-MAH and Its Applicationin Nano-meter CaCO_3/HDPE Composite;
相容剂的制备及其在纳米碳酸钙填充高密度聚乙烯中的应用
补充资料:相容剂
分子式:
CAS号:
性质:聚合物A与聚合物B两组分如果不相容,则可加入嵌段或接枝共聚物(A-B),使A、B两组分相容,这种嵌段或接枝物(A-B)称为相容剂。相容剂可以是A-B组成的接枝或嵌段共聚物,也可以是C-D组分,此时要求C与A亲和,D与B亲和。相容剂的作用原理是:相容剂分布于A、B两组分之间,相容剂的A段与A亲和,伸入A组分;B段与B组分相亲和,伸入B组分,这样就使A、B两相的黏结力提高。
CAS号:
性质:聚合物A与聚合物B两组分如果不相容,则可加入嵌段或接枝共聚物(A-B),使A、B两组分相容,这种嵌段或接枝物(A-B)称为相容剂。相容剂可以是A-B组成的接枝或嵌段共聚物,也可以是C-D组分,此时要求C与A亲和,D与B亲和。相容剂的作用原理是:相容剂分布于A、B两组分之间,相容剂的A段与A亲和,伸入A组分;B段与B组分相亲和,伸入B组分,这样就使A、B两相的黏结力提高。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条