1) high carbon tool steels
高碳工具钢
1.
The results show that the slurry of high carbon tool steels prepared after stirring during solidification can make products without segregation and defect like network carbide which tend to occur during direct rolling.
探讨了高碳工具钢常规的加工方法和半固态流变轧制技术,结果表明将在凝固过程中进行搅拌后制备的高碳工具钢半固态浆料直接进行流变轧制,可生产出成分均匀、没有偏析的产品,消除了在常规轧制中很难克服的网状碳化物等缺陷;半固态固相颗粒细小而且星球状可生产出高强、高韧性的工具钢。
2) tool steel carbon steel
工具钢-碳钢
3) Carbon Tool Steel
碳工具钢;碳素工具钢
4) carbon tool steel
碳素工具钢
1.
The chromizing hardening process of carbon tool steel was studied by using double glow plasma surface chromizing process+ion-nitriding at 560℃.
采用离子氮化+双层辉光离子渗金属的复合处理渗铬新技术,对碳素工具钢进行560℃表面渗镀铬硬化研究。
2.
The carbon tool steel was quenched into the different concentration of calcium chloride watery solution.
对碳素工具钢采用不同浓度的氯化钙水溶液进行淬火。
3.
In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.
为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。
5) carbon tool steel
含碳工具钢
6) low carbon tool steel
低碳工具钢
补充资料：碳素工具钢923
（见非合金工具钢）carbontoolsteel：含碳很高（0.7~1.35）、实际上不含合金元素的钢（钢种）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条