1) plain carbon tool steel
普通碳素工具钢
2) plain carbon steel
普通碳素钢
1.
The current research situations and obtained achievements in improving the strength of plain carbon steels are described systematically.
以建筑用钢筋为研究对象 ,系统介绍了目前对于提高普通碳素钢强度的国内外研究现状和取得的成果。
3) plain low carbon steel
普通碳素钢
1.
The relationship between volume fraction of ultra-fine grained ferrite and strain rate was investigated for a plain low carbon steel (type Q235).
针对普通碳素钢(Q235类型),研究在Ae3~Ar3温度区间内采用形变诱导铁素体机制获得超细晶铁素体的数量与变形速率的相互关系。
2.
TEM, EDS and EELS were used to analyze the microstructural characteristics of plain low carbon steel ZJ330 made by CSP technology.
本文利用透射电镜(TEM)和电子能量损失谱(EELS)以及X射线能量色散谱(ED)对珠钢CSP工艺生产的新一代普通碳素钢的显微结构及析出相进行了研究。
5) carbon tool steel
碳素工具钢
1.
The chromizing hardening process of carbon tool steel was studied by using double glow plasma surface chromizing process+ion-nitriding at 560℃.
采用离子氮化+双层辉光离子渗金属的复合处理渗铬新技术,对碳素工具钢进行560℃表面渗镀铬硬化研究。
2.
The carbon tool steel was quenched into the different concentration of calcium chloride watery solution.
对碳素工具钢采用不同浓度的氯化钙水溶液进行淬火。
3.
In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.
为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。
6) Carbon Tool Steel
碳工具钢;碳素工具钢
补充资料：普通碳素钢
plaincarbonsteel：不含有意识添加的合金元素（即只含有碳和常存杂质Si、Mn、P、S、O或者还含偶存杂质Cu等）的钢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条