炭纤维前驱体,Carbon fiber precursor,在线英语词典,英文翻译,专业英语

1) Carbon fiber precursor

炭纤维前驱体

2) Carbon fiber

炭纤维

The influence of carbonization temperatures on mesophase pitch-based carbon fibers;

炭化温度对中间相沥青基炭纤维性能的影响

Influence of phenolic resin surface treatment agent on interfacial adhesion of carbon fiber reinforced epoxy resin composites;

酚醛树脂表面处理剂对炭纤维增强环氧树脂复合材料界面强度的影响

Surface characteristics of different cross-section carbon fibers and its effect on interfacial adhesion properties of composite;

不同截面炭纤维表面特性及其对复合材料界面粘接性能的影响

3) Carbon fibers

炭纤维

Synthesis of nano nickel particles on carbon fibers by impregnation-reduction method;

采用浸渍-还原法在炭纤维表面制备纳米镍催化剂颗粒

Preparation of carbon felts reinforced by both SiC nano-fibers and carbon fibers;

碳化硅纳米纤维/炭纤维共增强毡体的制备

In order to select suitable catalyst from four metals(Fe、Co、Ni、Mo)to synthesize carbon nanofibers/carbon nanotubes on carbon fibers,by the impregnation-reduction method and chemical vapor deposition method were used four metal—salts separately as catalyst precursor,CO as carbon source,H_2 as reduction gas,N_2 as carrier gas.

为了选择合适的催化剂,来催化炭纤维生长纳米炭纤维/纳米碳管,分别以Fe、Co、Ni和Mo的金属盐为催化剂前驱体,H_2为还原气体,N_2为载气,采用浸渍—还原法在炭纤维表面制备纳米催化剂颗粒,再以CO为碳源,催化热解生长纳米炭纤维/纳米碳管。

4) PAN-carbon fiber

PAN炭纤维

5) bamboo charcoal fiber

竹炭纤维

The development of bamboo charcoal fiber/Tencel/Shengma blended face fabric;

竹炭纤维/天丝/圣麻混纺面料的研制

To research the relationship between the tensile properties of bamboo charcoal fiber and cotton fiber blended yarn,and the variation of the bamboo charcoal fiber content,the tensile properties of bamboo charcoal fiber and cotton fiber blended yarn of different blending ratios were tested through electronic yarn strength instrument YG061.

为了研究竹炭纤维/棉混纺纱中竹炭纤维含量与混纺纱拉伸性能的变化关系,对不同混纺比的竹炭纤维/棉混纺纱线在YG061电子单纱强力仪上进行拉伸性能测试,并对测试结果进行了分析和比较。

6) HTA carbon fiber

HTA炭纤维

参考词条

炭纤维织物炭纤维/酚醛 PAN基炭纤维纳米炭纤维炭纤维分布炭纤维原丝丙烯酸静电喷涂烘漆外加熔岩球（地）

补充资料：前驱体纤维

分子式：
CAS号：

性质：指制备下游碳纤维或陶瓷纤维的起始原丝，又称先驱体纤维或原丝。一般要求无毛丝和杂质含量低，尽可能减少表面和内部缺陷，同时须满足后道最终制品的性能要求，同时对其表面涂覆的油剂也有特殊要求，除起防静电和平滑作用以防毛丝产生外，往往还要注耐热性和提高产品力学性能有贡献。制法是根据不同聚合物选用湿纺和熔融纺成纤，再进行必要的后加工。用途主要是作各种高性能纤维及复合材料增强剂等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引短炭纤维炭纤维布炭纤维纸炭纤维（CF）活性炭纤维螺旋炭纤维

1) Carbon fiber precursor 炭纤维前驱体 2) Carbon fiber 炭纤维 1. The influence of carbonization temperatures on mesophase pitch-based carbon fibers; 炭化温度对中间相沥青基炭纤维性能的影响 2. Influence of phenolic resin surface treatment agent on interfacial adhesion of carbon fiber reinforced epoxy resin composites; 酚醛树脂表面处理剂对炭纤维增强环氧树脂复合材料界面强度的影响 3. Surface characteristics of different cross-section carbon fibers and its effect on interfacial adhesion properties of composite; 不同截面炭纤维表面特性及其对复合材料界面粘接性能的影响 3) Carbon fibers 炭纤维 1. Synthesis of nano nickel particles on carbon fibers by impregnation-reduction method; 采用浸渍-还原法在炭纤维表面制备纳米镍催化剂颗粒 2. Preparation of carbon felts reinforced by both SiC nano-fibers and carbon fibers; 碳化硅纳米纤维/炭纤维共增强毡体的制备 3. In order to select suitable catalyst from four metals(Fe、Co、Ni、Mo)to synthesize carbon nanofibers/carbon nanotubes on carbon fibers,by the impregnation-reduction method and chemical vapor deposition method were used four metal—salts separately as catalyst precursor,CO as carbon source,H_2 as reduction gas,N_2 as carrier gas. 为了选择合适的催化剂,来催化炭纤维生长纳米炭纤维/纳米碳管,分别以Fe、Co、Ni和Mo的金属盐为催化剂前驱体,H_2为还原气体,N_2为载气,采用浸渍—还原法在炭纤维表面制备纳米催化剂颗粒,再以CO为碳源,催化热解生长纳米炭纤维/纳米碳管。 4) PAN-carbon fiber PAN炭纤维 5) bamboo charcoal fiber 竹炭纤维 1. The development of bamboo charcoal fiber/Tencel/Shengma blended face fabric; 竹炭纤维/天丝/圣麻混纺面料的研制 2. To research the relationship between the tensile properties of bamboo charcoal fiber and cotton fiber blended yarn,and the variation of the bamboo charcoal fiber content,the tensile properties of bamboo charcoal fiber and cotton fiber blended yarn of different blending ratios were tested through electronic yarn strength instrument YG061. 为了研究竹炭纤维/棉混纺纱中竹炭纤维含量与混纺纱拉伸性能的变化关系,对不同混纺比的竹炭纤维/棉混纺纱线在YG061电子单纱强力仪上进行拉伸性能测试,并对测试结果进行了分析和比较。 6) HTA carbon fiber HTA炭纤维参考词条炭纤维织物炭纤维/酚醛 PAN基炭纤维纳米炭纤维炭纤维分布炭纤维原丝丙烯酸静电喷涂烘漆外加熔岩球（地）补充资料：前驱体纤维分子式： CAS号：性质：指制备下游碳纤维或陶瓷纤维的起始原丝，又称先驱体纤维或原丝。一般要求无毛丝和杂质含量低，尽可能减少表面和内部缺陷，同时须满足后道最终制品的性能要求，同时对其表面涂覆的油剂也有特殊要求，除起防静电和平滑作用以防毛丝产生外，往往还要注耐热性和提高产品力学性能有贡献。制法是根据不同聚合物选用湿纺和熔融纺成纤，再进行必要的后加工。用途主要是作各种高性能纤维及复合材料增强剂等。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com