1) suspension polymerization in aqueous medium
水相悬浮聚合
1.
Higher molecular polyacrylonitrile(PAN) wa s prepared by the method of suspension polymerization in aqueous medium.
采用水相悬浮聚合法 ,合成较高分子量聚丙烯腈 ( PAN) ;讨论了不同条件对聚合反应及其产物的影响 ,并对样品结构和性能进行 DSC、GPC、IR分析和表征。
2) aqueous suspension precipitation polymerization
水相悬浮沉淀聚合
1.
Using redox system as initiator,copolymerization of acrylonitrile(AN) and methacrylate(MA) was carried out via the method of aqueous suspension precipitation polymerization.
采用水相悬浮沉淀聚合法,以氧化还原体系为引发剂,合成了丙烯腈(AN)与丙烯酸甲酯(MA)的共聚物。
3) Inverse suspension polymerization
反相悬浮聚合
1.
Study and application of inverse suspension polymerization technique;
反相悬浮聚合技术的研究进展与应用
2.
Synthesis of super high molecular weight sodium polyacrylate by inverse suspension polymerization;
反相悬浮聚合法合成超高分子量聚丙烯酸钠
3.
Effect of dispersion agent on the properties of water absorption Resin in inverse suspension polymerization;
分散剂对反相悬浮聚合吸水树脂性状的影响
4) inverse suspension polymerization
反相悬浮聚合法
1.
A kind of salt-resisting multi-copolymerized superabsorbent polymer was synthesized by inverse suspension polymerization of acrylic acid(AA) , acrylamide( AM), soldium 2-acrrlamido-2-methyl-propanesulfonate(NaAMPS) and DADMAC using N, N-methylene-bis-acrylamide as crosslinking agent, and sodium sulfite as initiator, and cyclohexane as continuous phase.
采用反相悬浮聚合法,以过硫酸钾为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,合成了丙烯酸钠/丙烯酰胺/2-丙烯酰胺基-2-甲基丙磺酸钠/二烯丙基二甲基氯化铵四元共聚高吸水性树脂。
2.
The starch-acrylic acid(AA)-acrylamide(AM) super absorbent resin was prepared from sweet potato starch as a raw material, acrylic acid and acrylamide as monomer, ammonium persulfate-sodium bisulfate as initiator, n,n-methylene-bisacrylamide as cross-linking agent by inverse suspension polymerization, and the best synthesize craft conditions were studied.
以红薯淀粉为原料，丙烯酸(AA)和丙烯酰胺(AM)为单体，过硫酸铵和亚硫酸氢钠为引发剂，N，N—亚甲基双丙烯酰胺为交联剂，采用反相悬浮聚合法合成了淀粉-丙烯酸-丙烯酰胺高吸水性树脂，并研究了最佳合成工艺条件。
3.
Poly(sodiumacrylate)/montmorillonite composite was synthesized by inverse suspension polymerization using partially neutralized acrylic acid and montmorillonite.
以丙烯酸和蒙脱土为原料,利用反相悬浮聚合法进行了聚丙烯酸钠/蒙脱土复合高吸水性树脂的合成研究。
5) reversed phase suspension polymerization
反相悬浮聚合
1.
A spherical lignin-based ion exchange resin was prepared with calciumlignosulfonate as raw material in a cheap and non-toxic disperse phase by reversed phase suspension polymerization technique.
以木素磺酸钙为原料,利用反相悬浮聚合技术制备出球状木素基离子交换树脂。
2.
The spherical ligninbased cation exchange resin was prepared with calcium lignosulphonate as raw material in a cheap and non-toxic dispersing medium by reversed phase suspension polymerization.
以木素磺酸钙为原料,在一种价廉无毒的分散介质中通过反相悬浮聚合制备了球形木素基正离子交换树脂。
3.
High water absorbent poly(sodium acrylate) was prepared by reversed phase suspension polymerization.
采用反相悬浮聚合法制备聚丙烯酸钠高吸水树脂 ,研究了中和度、引发剂用量、交联剂用量、悬浮剂用量对高吸水树脂的吸水性能的影响。
6) organic two-phase suspension polymerization
双油相悬浮聚合
1.
A macro-porous hydrophilic bead copolymer was synthesized by organic two-phase suspension polymerization,with glycidyl methacrylate and acrylamide as monomers, N,N ′ -methylene-bis(acrylamide) as a crosslinker and formamide as the dispersion phase, behaving as porogenic agent, the continuous phase being n -heptane.
选用甲基丙烯酸缩水甘油酯(GMA) 和丙烯酰胺(AA) 为单体, 以N, N′亚甲基双(丙烯酰胺) (MBAA) 为交联剂, 甲酰胺为致孔剂,正庚烷为连续相, 通过双油相悬浮聚合制得一种大孔珠状共聚物载体, 可作为固定化酶或蛋白质纯化介质的载体。
补充资料：反相悬浮聚合
分子式：
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条