说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 斜孔分布板
1)  tilted-hole distributor
斜孔分布板
1.
The experimental results show that tilted-hole distributor can help to finish fluidization of inert particles, because it produces air rotation.
实验结果表明 :气体分布板为斜孔时所造成的旋转气流有助于惰性粒子正常流化状态的产生 ;与直孔分布板干燥器相比 ,斜孔分布板干燥器更有利于传质性能的提高 ,但孔板压降较
2)  wide bore distribution plate
大孔分布板
1.
The short abrasive resistant tube on the wide bore distribution plate in regenerator of 1000kt/a heavy oil FCC unit of the refinery of Daqing Petrochemical Branch is synthesized by 0Cr18Ni9 sleeve with a short ceramic tube as an abrasive-resistant internal lining.
中国石油大庆石化分公司炼油厂1000kt/a重油催化裂化装置再生器大孔分布板上的耐磨短管,由0Cr18Ni9套管内衬陶瓷耐磨短管复合而成。
3)  multihole distributor
多孔分布板
4)  multiorifice plate
多孔布风板,多孔分布板
5)  perforated plate distributor
多孔板分布器
1.
The effect of a perforated plate distributor on the hydrodynamics of a slurry bubble column at high solid concentrations;
高固相浓度下多孔板分布器对淤浆床内流动特性的影响
6)  hetero-pores distributor
变孔径分布板
1.
This is achieved by a hetero-pores distributor which has a resistant coefficient distribution analogous to that of liquid velocity.
因此提出采用变孔径分布板来改善液速的非均匀分布,从而减小液相返混。
补充资料:斜楔式侧孔冲模

工件套在件6上用件9上的台阶定位,而件9用件18防转并且起到圆周方向定位的作用,当上模下行时,件5先将工件压牢,上模继续下行时,由斜楔4推动件11和装在件11上的件8完成冲孔工作。当上模上升时件11在件4的作用下退回,按下件16,工件由与件16相连的件9顶出.




 



工件图


 



 



 



 


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条