1) partial penetration
部分熔透
1.
Experimental research on fatigue crack growth for cross shaped welded joint with partial penetration;
部分熔透十字焊接接头疲劳性能试验
2.
Both monotonic axial compressive and axially loaded cyclic tests have been carried out on the steel box brace used in New CCTV Building to investigate the effect of assembling welds including full penetration and partial penetration on the structural behavior of the brace.
为考察全熔透和部分熔透两种组装焊缝形式对箱形截面钢支撑受力性能的影响,本文对中央电视台新台址建设工程中的箱形截面支撑进行了单调受压、轴向反复拉压试验;同时,采用ABAQUS有限元软件实现了对部分熔透试件未熔透处的接触模拟和滞回性能模拟。
2) excessive local penetration
局部过熔透
3) Partial Remelting
部分重熔
1.
Effects of Heating Temperature on Partial Remelting Microstructure of AZ91D Magnesium Alloy;
加热温度对AZ91D镁合金部分重熔组织的影响
2.
Microstructure evolution of magnesium alloy AZ91D prepared by electric current pulse discharge during partial remelting;
脉冲电场下制备AZ91D镁合金部分重熔过程的组织演变
3.
Effect of isothermal temperature on microstructure of semi-solid 2024 alloy during partial remelting;
等温温度对半固态2024合金部分重熔组织的影响
4) partial melting
部分熔化
1.
In order to improve the performances of Bi-2212/Ag tapes (mainly refer to crital current density Jc), the experiment for effects of partial melting process on Jc of the tapes was conducted.
为了提高Bi-2212/Ag带的性能(主要指临界电流密度Jc),进行了部分熔化热处理工艺对带材Jc的实验。
2.
The effect of different stages of the partial melting process on the phase component and microstructure of (Bi,Pb)-2223/Ag strip was analyzed and compared to the normal two-stage heat treatment process.
通过部分熔化处理工艺和普通两段热处理工艺的对比研究,分析了部分熔化处理工艺在不同热处理阶段对(Bi,Pb)-2223/Ag带材相组成和微结构的影响。
5) partial melting
部分熔融
1.
An attempt at the mapping method of geological bodies derived from partial melting in the hengshan area;
恒山地区部分熔融地质体填图方法的尝试
2.
Progressive partial melting of metapelite and its tectonophysical effects;
变泥质岩递进部分熔融作用的构造物理学效应
3.
The partition characteristic of trace elements in the partial melting massive amphibolite at 1.5 GPa and 950 ℃
1.5GPa、950℃下块状斜长角闪岩部分熔融微量元素的分配特征
6) partial fusion
部分熔合
1.
The result indicates that partial fusion of weakly bound nuclei most likely ta.
由部分熔合截面与完全熔合截面之和得到总熔合截面。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条