1) body-fitted coordinate
贴体坐标
1.
Generation of body-fitted grids and transformation of the 2-D sediment movement equation in body-fitted coordinate regions;
贴体网格的生成与平面二维泥沙运动方程在贴体坐标区域中的变换
2.
A three-dimensional turbulent combustion flow field of longitudinal heat shield afterburner was numerically investigated in a body-fitted coordinate system.
数值研究纵向隔热屏加力燃烧室的在三维贴体坐标系下燃烧整体流场,所用的数学模型有:k-ε模型、EBU-Arrehenius和二阶矩紊流燃烧模型及六通量模型等。
3.
The body-fitted coordinate system has been used in the numerical simulation of the three dimension flow field in the boat-shaped pulverized coal burner and the total pressure correction has been established.
本文将贴体坐标用于具有复杂形状的船型体煤粉燃烧器的三维流场数值模拟中，建立了在贴体坐标下的总体质量校正方程。
2) body-fitted coordinates
贴体坐标
1.
The simulation employed a second order Van Leer scheme which has TVD property and used body-fitted coordinates.
文中针对XX-XX联合动力装置尾喷管射流在超音速、欠膨胀状态下进行了三维流场数值模拟,对燃气流场中的压力、密度、马赫数的分布进行了理论计算,并对流场的激波结构进行了对比分析,控制方程为三维、雷诺平均Navier-Stokes方程及k-ε二方程的湍流模型,差分格式采用具有TVD性质的二阶精度的VanLeer格式,流场计算采用贴体坐标。
2.
This paper presents a method for the correction of angle,arranges suitably the gridpoints on arbitrary two adjacent boundaries in the cooling system in advance and then modifies the body-fitted coordinates by the solution of Laplace s equation.
提出一种简单易行的角度修正方法，在内燃机冷却通道的任意一组邻边上预先按要求布置网格点，通过求解拉普拉斯方程并对贴体坐标进行修正，无需采用特殊技巧生成二维正交贴体坐标系。
3) body fitted coordinate
贴体坐标
1.
The body fitted coordinate (BFC) transformation equation is derived using the transformation equation, BFC grids of the molten pool area in twin roll strip casting process is generated.
该文推导了贴体坐标转换方程 ,通过离散方程生成了双辊薄带连铸熔池区域物理平面的贴体网格 ,同时采用修正源项的方法对网格在边界处的正交性进行了修正 ,将冶金传输过程中的通用传输方程从物理区域转变到计算区域中 ,并将物理区域中的边界条件向计算区域进行了一一对应转换 。
2.
A method is adopted in this paper,which utilizes finite-element method for solving Laplace equations directly in physical region and forms orthogonal body fitted coordinate grids by searching given isolines.
给出了在物理域内利用有限元素法直接求解Ｌａｐｌａｃｅ方程，通过对给定的等值线的搜索生成正交贴体坐标网格的方法本方法具有计算误差小，容易保证网格的正交性，网格的疏密易于调整等特点本方法通用性强，便于应用
3.
It is presented that numerical method with vorticity-stream function formulation adopts body fitted coordinate system and solves flow field in which the incompressible vicous flow pass a backward facing step including a inner cylinder by using a method decomposed full domain to multi-blocks.
本文采用涡量一流函数方法，应用贴体坐标技术来研究后向台阶粘性流动，利用作者提出的多连通区域分块计算方法研究了流动区域内含一圆柱体的粘性流动问题。
4) boundary-fitted coordinate
贴体坐标
1.
SIMPLE scheme based on boundary-fitted coordinate was adopted to solve the velocity fields in a rotating curved eccentric pipe.
采用贴体坐标系下的SIMPLE方法来求解旋转环形偏心圆截面弯管内流体流动的速度场。
5) boundary-fitted coordinate system
贴体坐标
1.
The boundary-fitted coordinate system and the finite differe nce method are employed for simulating the resin flow process.
采用贴体坐标/有限差分法模拟了树脂渗流过程,给出了不同时刻树脂流动前沿曲线及终止时刻压力场分布,计算结果与试验结果吻合良好。
2.
A boundary-fitted coordinate system and the finite difference method are employed for simulating the resin flow process in the case of two injection ports.
采用贴体坐标/有限差分法模拟了双孔注射情形下树脂渗流过程,给出了不同时刻树脂流动前沿曲线,计算网格及终止时刻压力场分布,确定了排气孔位置,计算结果与其它研究结果吻合良好。
6) body fitted coordinate(BFC)
贴体坐标(BFC)
补充资料：贴体
1.紧贴肤体。 2.犹贴心。 3.方言。合身。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条