1) Position of pouring plug
浇口塞装置
2) blanking-off plug
浇口塞
3) d socket arrangement
插塞插口装置
4) gate location
浇口位置
1.
Experiential Scouting Method:New Method of Optimization of Gate Location of Mold Design;
注塑模浇口位置优化新方法——经验搜索法
2.
Design Optimization of Plastics Injection Mold Gate Location Based on MoldFlow;
基于MoldFlow软件优化设计注塑制件的浇口位置
3.
Taking into account the great influences of gate location on part warpage,the computer aided engineering for injection molding was combined with optimization technology to find the optimal gate location with minimized feature warpage.
通过优化特征翘曲度,将数值模拟和优化技术相结合,提出一种注塑模具浇口位置设计方法。
5) gate position
浇口位置
1.
In view of the importance of gate position and quantity in the design of injection plastic molding,Moldflow,special software for analyzing the plastic flow in mold,was applied to the optimization design of gate in injection mold.
针对选择合理的浇口位置及数量在塑料模具设计中的重要性,在注塑模具设计中利用专业模流分析软件MoldFlow对模具浇口进行了优化设计。
2.
The relations of gate position to product shrinkage,gate dimension to facticity data of tensile strength and toughness of injection materials to mould cavity and ejector mechanism were stated.
简述了塑料测试试样浇口位置与制品收缩的关系,阐述了浇口尺寸与拉伸强度数据真实性的关系,以及注塑材料的韧性程度与型腔设计及顶出机构等关系,提出了解决问题的措施;还提出了从根本上解决厚制品收缩的方法——盆地修模法。
3.
The relations between gate position and injection pressure, weldline as well as part thickness in valve-typed controlled filling process are analyzed.
介绍阀式浇注控制的原理和特点,通过对浇注系统的控制充填模式研究,以注塑流动分析为理论基础,依靠CAE技术对浇注充填过程进行流动模拟,分析阀式控制的充填过程中浇口位置与注塑压力、熔接痕、制件壁厚之间的相互关系,为改善注塑工艺条件和提高注塑产品质量提供理论依据。
6) Gate Location
浇口布置
补充资料：塞口
1.犹塞门。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条