1) elongation at break
拉断伸长率
1.
Effects of powdered fillers on elongation at break of rubber composites;
粉状填充剂对橡胶复合材料拉断伸长率的影响
2) tensile elongation at break
拉伸断裂伸长率
1.
The different results of tensile elongation at break,tensile strain at break,and nominal tensile strain showed that nominal tensile strain was more precise and truer compared with tensile elongation at break.
建议使用塑料拉伸性能试验方法的科研人员,进行相关材料的拉伸断裂伸长率和断裂标称应变的比对实验,以保证科研工作的延续性。
3) Retention rate of elongation at break
拉伸断裂伸长率保留率
4) cold drawing elongation
冷拉伸长率
5) pull force-tensile stretch
拉力–伸长率
6) elongation at break
断裂伸长率
1.
The tensile strength,elongation at break,notch impact strength and flexural strength of PBT were increased by 12%,100%,1.
1份时,PBT的拉伸强度提高12%,断裂伸长率提高100%,冲击强度提高10%,弯曲强度提高5%,综合力学性能最好。
2.
The tensile strength and the elongation at break were 23 MPa and 460% when the compound plasticizing agent were made up of(1.
在此条件下,PVA217流延膜的各种性能较好,拉伸强度约为23 MPa,断裂伸长率约为460%。
3.
The resin could be cured at ambient temperature and the tensile strength and elongation at break of the cured resin were 20 MPa and 106% respectively,which could be used to make high flexible products or could be also added in normal unsaturated polyester resins to improve their anti-impact properties and elongation at break.
介绍了1种新型二异氰酸酯改性不饱和聚酯,该树脂可以室温固化,固化后树脂的拉伸强度和断裂伸长率分别可达20 MPa和106%。
补充资料：拉断伸长率
分子式：
CAS号：
性质：指试样在拉断时的伸长率，用伸长增量与原长之比的百分数表示:式中，ε为拉断伸长率(％)，L0为试验前试样的工作标距(mm)，L1为试样在拉断时的标距(mm)。
CAS号：
性质：指试样在拉断时的伸长率，用伸长增量与原长之比的百分数表示:式中，ε为拉断伸长率(％)，L0为试验前试样的工作标距(mm)，L1为试样在拉断时的标距(mm)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条