1)  decabromodiphenyl oxide
十溴苯醚
1.
The low smoke materials were prepared from EPDM rubber, fire retardant for antimony trioxide (Sb-2O-3) and decabromodiphenyl oxide (DBDPO), and the effects of dosage for fire retardant for antimony trioxide and decabromodiphenyl oxide on the properties of smoke and mechanisms were studied.
以三元乙丙橡胶(EPDM)为基体材料,三氧化二锑、十溴苯醚为阻燃剂制备了材料配方,试验了三氧化二锑(Sb2O3)、十溴苯醚(DBDPO)配比对材料烟雾和力学性能的影响,测试了材料的氧指数,可见光的透过率,自熄性等。
2)  decabromodiphenyl oxide
十溴二苯醚
1.
Study on flame retardancy of decabromodiphenyl oxide and antimony trioxide in EPDM/PP;
十溴二苯醚与Sb_2O_3对EPDM/PP的阻燃化研究
2.
Decabromodiphenyl ethane(DBDPE),decabromodiphenyl oxide(DBDPO),and tris(tribro- mophenoxy)triazine(TBPC)were separately mixed with Sb_2O_3 and introduced into poly(trimethylene terephthlate)(PTT)through extrusion as flame retardants.
采用十溴二苯乙烷、十溴二苯醚和三(三溴苯氧基)三嗪分别与三氧化二锑复配,经双螺杆挤出机熔融共混制备阻燃聚对苯二甲酸丙二酯(PTT)复合材料,研究了阻燃剂的种类和用量对 PTT 结构性能的影响。
3.
The flame resistances and tensile strengths of decabromodiphenyl oxide (DBDPO) and octabromodiphenyl oxide (OBDPO), to low density polyethylene (LDPE) were researched.
讨论了十溴二苯醚(DBDPO)和八溴二苯醚(OBDPO)对低密度聚乙烯(LDPE)的阻燃性能和拉伸强度的影响。
3)  decabromodiphenyl oxide
十溴联苯醚
1.
The synergistic effect between chlorinate paraffin,dechlorane plus,decabromodiphenyl oxide and on fire-retardant properties of low density polyethylene was studied.
研究了氯化石蜡(CP)、双(六氯环戊二烯)环辛烷(DCRP)以及十溴联苯醚(DBDPO)并用阻燃低密度聚乙烯(LDPE)的阻燃协同效应,采用锥形量热仪测试了阻燃体系的燃烧特性。
4)  decabromodiphenyl ether
十溴联苯醚
1.
Oxidative damage of decabromodiphenyl ether to the mitochondria from the liver of Carassius auratus in vitro;
离体条件下十溴联苯醚暴露对鲫鱼肝脏线粒体的氧化损伤
2.
The weight ratio of decabromodiphenyl ether and antimony oxide influenced both the flame retardance and mechanical properties.
结果表明 :三氧化二锑与十溴联苯醚复配后对阻燃体系的热稳定性产生影响 ,而且阻燃体系的热分解速率与二者的配比有密切关系。
3.
As a high effective halogenated flame retardants, decabromodiphenyl ether (DBDPO) plays an important role in flame-retarded cable.
十溴联苯醚(DBDPO)是一个阻燃效率高、在电缆中应用广泛的卤素阻燃剂。
5)  decabromodiphenyl ether
十溴二苯醚
1.
Catalytic synthesis of decabromodiphenyl ether was carried out by brominating diphenyl oxide in the presence of a novel metal catalyst HD 01.
采用均匀试验设计和单纯形寻优法对溴素法合成十溴二苯醚的工艺条件进行了研究 ,在新型金属型催化剂 HD- 0 1存在的条件下 ,当二苯醚与溴的摩尔比为 1∶ 3 0 ,催化剂用量为二苯醚质量的 2 0 % ,二苯醚的滴加温度为 3 0°C,回流反应时间为 5 。
2.
A new process for catalytic synthesis of decabromodiphenyl ether with improved quality was carried out by brominating diphenyl oxide with bromine chloride in the presence of a metal catalyst HD2001.
采用均匀实验设计和单纯形寻优法得出氯化溴法催化合成十溴二苯醚最优工艺条件 :在金属型催化剂HD2 0 0 1存在的条件下 ,n(C12 H10 O)∶n(BrCl) =1∶13 ,m(HD2 0 0 1)∶m(C12 H10 O)=1∶10 ,二苯醚滴加温度为 12℃ ,回流反应时间为 7 2h ,在此条件下 ,十溴二苯醚收率达97 1% ;催化剂HD2 0 0 1克服了传统催化剂易潮解、吸水 ,不易储存、运输的缺点 ,更适于工业化生产 ;使用二甲苯这种经济易得的溶剂 ,简化了十溴二苯醚的精制工
3.
This paper studied two new processes for catalytic synthesis of decabromodiphenyl ether which were carried out distinguishingly by brominating diphenyl oxide with bromine and bromine chloride in the presence of a novel metal catalyst.
本文研究了采用新型金属型催化剂催化合成十溴二苯醚的溴素法和氯化溴法两种新工艺;利用均匀实验设计和单纯形优化试验技术对两种新工艺的工艺条件进行了优化研究,分别确定了两种工艺路线的最佳工艺条件;通过筛选,确定了一种十溴二苯醚的精制新工艺。
6)  Pentabromophenyl ether
十溴联苯醚
参考词条
补充资料:十溴二苯醚
   分子式  (C6Br5)O
   分子量  959.1714
  CAS号  1163-19-5
  性质  白色或淡黄色粉末。熔点304~309℃。溴含量83.3%。几乎不溶于所有溶剂。热稳定性良好。
   用途  添加型阻燃剂,用途广泛,可用于聚乙烯、聚丙烯、ABS树脂、聚对苯二甲酸丁二酯(PBT)、聚对苯二甲酸乙二酯(PET)以及硅橡胶、三元乙丙橡胶等制品中。与三氧化二锑并用阻燃效果更佳。是无污染阻燃剂。
   毒性   大鼠经口LD50>15g/kg。可以用于塑料制品,由于原料有毒,生产设备应密闭,操作现场应有良好通风。操作人员穿戴防护用具。 
   包装储运  用铁桶或编织袋内衬塑料袋包装。每桶(袋)净重25kg。贮存于干燥、通风良好的库房中。贮运时注意防火、防晒。按一般化学品规定贮运。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。