1) NBR
丁腈胶
1.
The reinforcement effect of modified nano-calcium carbonate to NBR;
改性纳米碳酸钙对丁腈胶的补强作用
2) butadiene nitrile rubber
丁腈胶
1.
Use an electronic microscope to observe the microstructure of reclaimed rubber and then mix reclaimed rubber with butadiene nitrile rubber to make semiconducting rubber The test shows that the property of the mixture semiconducting rubber is complete conformity with the JB664-77 Standard.
用电子显微镜对再生胶的微观结构进行观察分析,进而将再生胶与丁腈胶混合并用制成半导电橡皮。
2.
Mix reclaimed rubber with butadiene nitrile rubber in different ratio and fill it with acetylene black.
结果表明:并用胶的体积电阻率比纯丁腈胶降低了7~9个数量级。
3) butadiene-acrylonitrile rubber
丁腈橡胶
1.
Preparation of powdered butadiene-acrylonitrile rubber by coagulation;
用凝聚法制备粉末丁腈橡胶
2.
Morphology and properties of fluoroelastomer/butadiene-acrylonitrile rubber blends;
氟橡胶/丁腈橡胶共混物的相态结构及性能
3.
Preparation and Industrial Enlargement of a Particular Kind of Butadiene-acrylonitrile Rubber;
一种特种丁腈橡胶的制备及工业放大
4) nitrile rubber
丁腈橡胶
1.
Structrue and properties of hydrogenated nitrile rubber;
氢化丁腈橡胶的结构与性能
2.
Compression characteristics of polyester short fiber/nitrile rubber vulcanizates;
聚酯短纤维增强丁腈橡胶硫化胶的压缩性能
3.
Properties of nitrile rubber/nano-calcium carbonate modified with borate coupling agent composites;
丁腈橡胶/硼酸酯偶联剂改性纳米碳酸钙复合材料的性能
5) acrylonitrile-butadiene rubber
丁腈橡胶
1.
Effect of preparation conditions on dielectric and piezoelectric properties of piezoelectric ceramics/acrylonitrile-butadiene rubber composites;
制备条件对压电陶瓷/丁腈橡胶复合材料介电性能和压电性能的影响
2.
Reinforcing acrylonitrile-butadiene rubber by triethylene tetramine acrylate;
用三乙烯四胺丙烯酸盐增强丁腈橡胶
3.
Structure and properties of acrylonitrile-butadiene rubber/poly(vinyl chloride)/hindered phenol AO-60 blends;
丁腈橡胶/聚氯乙烯/受阻酚AO-60共混物的结构与性能
6) NBR
丁腈橡胶
1.
A Preliminary Study on Surface Fluorination Reaction Kinetics of NBR with XeF_2;
红外光谱法研究XeF_2表面氟化丁腈橡胶动力学
2.
IMPROVE ACRYLONITRILE RECOVERY SYSTEM TO STABILIZE NBR POLYMERIZATION PROCESS;
改进丙烯腈回收系统 稳定丁腈橡胶聚合工艺
3.
Effective Factors on New Type Coordination Crosslinked CuSO_4/NBR Composite;
新型配位交联硫酸铜/丁腈橡胶复合材料的影响因素
补充资料:丁腈胶黏剂
分子式:
CAS号:
性质:以丁腈橡胶为主体材料的胶黏剂。分乳液型、溶剂型和胶膜型。由丙烯腈含量较高的丁腈橡胶配以增黏树脂、硫化剂、补强剂、防老剂等配合剂,经混炼、出片、剪碎、溶解而制成或由混炼胶直接出片而制成胶膜。按黏合强度可分为结构型和非结构型。非结构型主要用于丁腈硫化及未硫化胶片黏合以及丁腈橡胶与PVC之间的黏合;结构型胶黏剂用于各种玻璃钢、金属、工程塑料等材料的黏合。
CAS号:
性质:以丁腈橡胶为主体材料的胶黏剂。分乳液型、溶剂型和胶膜型。由丙烯腈含量较高的丁腈橡胶配以增黏树脂、硫化剂、补强剂、防老剂等配合剂,经混炼、出片、剪碎、溶解而制成或由混炼胶直接出片而制成胶膜。按黏合强度可分为结构型和非结构型。非结构型主要用于丁腈硫化及未硫化胶片黏合以及丁腈橡胶与PVC之间的黏合;结构型胶黏剂用于各种玻璃钢、金属、工程塑料等材料的黏合。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条