1) Micromolding
微模塑
1.
Microstructure of PMMA/SiO_2 Hybrid Material Fabricated by Micromolding;
微模塑法制备PMMA/SiO_2二氧化硅杂化材料微结构
2.
Making the Micro-patterns Directly on a Curved Surface of Polymer by Micromolding;
用微模塑直接在聚合物曲面上制备微图形(英文)
3.
A micromolding technique was studied,which was used for fabricating stators of micromotors with polymer substrate,and the technique increase the reliability of micromotors and reduce cost of manufacturing.
介绍了一种微模塑工艺,可用于制作以聚合物为基底的微电机定子,从而提高了电机的可靠性,降低了制造成本。
2) Micro-molding
微热模塑
1.
Spherical Micro-lens Array of Polystyrene Made by Micro-molding Method;
微热模塑法制备聚苯乙烯球面微透镜阵列
3) micromolding in capillaries
毛细微模塑
1.
Micro-strip and micro-dot patterns of PVP/Ru(dpphen)_3Cl_2 was produced by micromolding in capillaries(MIMIC) and micro-transfer molding(μTM) separately.
用毛细微模塑法和转移微模塑法分别制备了钌有机螯合物掺杂的PVP微条纹和点阵微图形。
2.
Micromolding in capillaries of a micro-square array was carried out for polystyrene solution in acetone by means of swollen polydimethylsiloxane (PDMS) elastomeric stamp.
用溶胀后的聚二甲基硅氧烷弹性印章进行毛细微模塑,得到了聚苯乙烯丙酮溶液的微四方点阵图案。
3.
They are microcontact printing, micro molding, microtransfer molding, micromolding in capillaries, solvent assisted micromolding and photolithography in the optical near field.
:“软刻蚀”是相对于微制造领域中占据主导地位的刻蚀而言的微图形转移和微制造的新方法 ,总的思路就是把用昂贵设备生成的微图形通过中间介质进行简便而又精确的复制 ,提高微制作的效率 ,包括微接触印刷 ,毛细微模塑 ,溶剂辅助的微模塑 ,转移微模塑 ,微模塑 ,近场光刻蚀等。
4) Microtransfer molding
转移微模塑
1.
Microtransfer molding (μTM ) is a kind of soft lithography for polymer micropatterning.
转移微模塑是软刻蚀方法中重要的一种,它成本低、效率高、简便、应用范围广,因此
2.
They are microcontact printing, micro molding, microtransfer molding, micromolding in capillaries, solvent assisted micromolding and photolithography in the optical near field.
:“软刻蚀”是相对于微制造领域中占据主导地位的刻蚀而言的微图形转移和微制造的新方法 ,总的思路就是把用昂贵设备生成的微图形通过中间介质进行简便而又精确的复制 ,提高微制作的效率 ,包括微接触印刷 ,毛细微模塑 ,溶剂辅助的微模塑 ,转移微模塑 ,微模塑 ,近场光刻蚀等。
5) microinjection mold
微注塑模具
1.
By the method,the nickel micro-electroforming pattern was directly made on a metal substrate by a low-cost UV-LIGA surface micro-fabrication process using the negative thick SU-8 photoresist to form the microinjection mold.
介绍了一种新颖的微注塑模具的制作方法———无背板生长法,它是利用负性厚SU-8光刻胶,通过低成本的UV-LIGA表面微加工工艺,直接在金属基板上电铸镍图形而制作完成的。
6) thermal micromolding
热压微模塑
补充资料：压塑模塑
分子式：
分子量：
CAS号：
性质：见压塑法。
分子量：
CAS号：
性质：见压塑法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条