1) injection molding
注塑模塑
1.
The mixing principle and characteristic of cavity transfer mixer using in injection molding machine were investigated.
介绍了注射机中腔穴传递式混合器(CTM)在注塑模塑过程中的混合机理及混合特性,并评述了该类混合器的分散功能和混合效果。
2) injection mold
注塑模具
1.
Design and process of the injection mold according to UG;
基于UG的注塑模具的设计及加工
2.
Automatically determining parting line in injection mold design using the finite element method;
有限元方法在注塑模具分型线确定中的应用
3.
Research on the Green Manufacturing Method of the Injection Mold;
注塑模具的绿色制造方法研究
3) injection mold
注塑模
1.
Design of ejection device of fixed mold in injection mold;
注塑模定模顶出机构设计
2.
The Design of injection mold of slender tube plastic parts with thread;
带有螺纹的细长管类塑件注塑模设计
3.
Optimum gate design of the storage-box injection mold based on CAE technique;
基于CAE技术的收纳盒注塑模浇口优化设计
4) injection mould
注塑模
1.
The injection mould design for handset bottom based on Pro/E;
基于Pro/E的电话听筒下壳注塑模设计
2.
Pro/E-based design of injection mould for diagonal tee connector;
基于Pro/E斜三通管件注塑模设计
5) Injection mould
注塑模具
1.
Design and Manufacture of the Injection Mould for Battery Buckle of Mobile Phone;
基于UG的手机电池扣注塑模具设计与制造
2.
Parting Surface Design of Injection Mould Based on Pro/E;
基于Pro/E注塑模具的分型面设计
3.
Research on PDM system for medium and small-sized injection mould enterprises;
面向中小型注塑模具企业的PDM系统研究
6) Injection molding
注塑模
1.
Research on reconfigurable design methodology of injection molding core-pulling mechanism;
注塑模抽芯机构可重构设计方法
2.
Injection molding standard moldbase system is developed for injection molding conceptual design.
在分析注塑模标准模架结构特征的基础上,提出了应用产品族信息模型构建注塑模标准模架库的方法,并给出了注塑模标准模架产品族信息模型。
3.
The injection molding flow of six different pouring system for air-condition panel was analyzed respectively by using Molding Plastics Advisers (MPA)software.
利用模流分析软件Moldflow Plastics Advisers(MPA)对空调机面板注塑模6种构型不同的浇注系统分别进行注射成型流动分析。
补充资料：螺杆塑化注塑
分子式：
CAS号：
性质：由螺杆完成塑化作用的注塑成型过程。包括螺杆往复式注塑成型和螺杆-活塞式注塑成型。
CAS号：
性质：由螺杆完成塑化作用的注塑成型过程。包括螺杆往复式注塑成型和螺杆-活塞式注塑成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条