1) styrene sulfonic acid
苯乙烯磺酸
1.
IA-SSA copolymer,a scale inhibitor,was synthesized from itaconic acid (IA) and styrene sulfonic acid (SSA).
以衣康酸 (IA)和苯乙烯磺酸 (SSA)为原料 ,合成IA/SSA共聚物阻垢剂 ,确定的最佳合成条件 :反应温度为 10 3℃ ,反应时间为 2h ,引发剂用量为 7% (占单体总质量 ) ,IA∶SSA质量比为 2 8∶1。
2) polystyrene sulfonic acid
聚苯乙烯磺酸
1.
In the aqueous phase,choosing polystyrene sulfonic acid as template doping agent,polyvinyl alcohol as film-forming agent,and aniline as monomer,and utilizing ammonium persulfate to initiate and synthesize the complex solid of PANI/PSSA-PVA,and it's aqueous solution,and then with the method of spin-coating,the corresponding complex electrochromic films is prepared.
在水相中,以聚苯乙烯磺酸(PSSA)为模板掺杂剂,聚乙烯醇(PVA)为成膜助剂,苯胺(An)为单体,过硫酸铵(APS)引发合成水溶性导电聚苯胺/聚苯乙烯磺酸-聚乙烯醇(PANI/PSSA-PVA)复合物固体及其复合溶液,用旋涂法制备了相应的复合电致变色膜。
2.
Water soluble conductive polyaniline (PAn) was synthesized by the oxidation of aniline(An) doped with ammonium persulfate(APS) and polystyrene sulfonic acid(PSSA) through the method of emulsion polymerization.
以苯胺(An)为单体,过硫酸铵(APS)为引发剂,采用现场乳液聚合法合成了可完全溶于水的聚苯乙烯磺酸(PSSA)掺杂聚苯胺(PAn)。
3) Sodium styrene sulfonate
对苯乙烯磺酸钠
1.
A study was made on the preparation of the cation-exchange membranes including sulfonate and carboxylic acid groups by pre-irradiation grafting of acrylic acid(AA) and sodium styrene sulfonate(SSS) onto high-density polyethylene(HDPE).
利用电子束引发预辐射接枝技术,在高密度聚乙烯(HDPE)上接枝丙烯酸(AA)和对苯乙烯磺酸钠(SSS),制备一种含羧酸基团和磺酸基团的双功能基阳离子交换膜,详细研究了反应温度、单体总浓度、pH值变化及溶剂类型对接枝率的影响规律,明确了实验条件与接枝率的对应关系。
2.
A study was carried out on the preparation of cation-exchange membranes using a one-step method obtained by pre-irradiation grafting of acrylic acid (AA) and sodium styrene sulfonate (SSS) onto high-density polyethylene (HDPE).
高密度聚乙烯预辐照接枝丙烯酸和对苯乙烯磺酸钠单体混合溶液,运用一步法制备了一种羧酸基团和磺酸基团共存的阳离子交换膜,并考察了单体总浓度、辐照剂量、反应温度及交联剂用量诸因素对接枝率的影响规律,找到了实验条件与接枝率的对应关系。
4) sodium polystyrene sulfonate
聚苯乙烯磺酸钠
1.
Preparation and characterization of a new pharmaceutical grade excipient:sodium polystyrene sulfonate-ion exchange resin;
一种新型药用辅料——聚苯乙烯磺酸钠离子交换树脂的合成与表征
2.
Characteristics of the new excipient sodium polystyrene sulfonate;
聚苯乙烯磺酸钠理化性质的考察
3.
Study on Sodium Polystyrene Sulfonate Drug-resins Liquid Sustained-release System;
聚苯乙烯磺酸钠药物树脂液体缓释给药系统的研究
5) sodium p-styrene sulfonate
对苯乙烯磺酸钠
1.
Study on copolymerization kinetics of methylacrylic acid and sodium p-styrene sulfonate;
甲基丙烯酸和对苯乙烯磺酸钠共聚反应动力学研究
2.
With water as solvent and redox system of hypophosphorous acid and hydrogen peroxide as initiator,a low phosphonic-containing copolymer is prepared through the reaction of maleic anhydride with sodium p-styrene sulfonate.
以水为溶剂,采用过氧化氢/次磷酸氧化-还原体系为引发剂,用马来酸酐、对苯乙烯磺酸钠为单体,合成了低磷共聚物。
3.
The monomers are maleic anhydride (MA), sodium p-styrene sulfonate (SS) and crylic acid acrylate (HPA).
以水为溶剂，过氧化氢为引发剂，硫酸铁铵为催化剂，以马来酸酐(MA)、对苯乙烯磺酸钠(SS)和丙烯酸羟丙酯(HPA)为单体，通过溶液聚合方法，合成聚合物阻垢剂。
6) styrene sulfonic sodium
苯乙烯磺酸钠
1.
The scale inhibition of polymer IA-SSS-MA was synthesized with itaconic acid(IA),styrene sulfonic sodium(SSS),maleic anhydride(MA) as monomers,water as solvent,ammonium persulfate as initiator.
以衣康酸(IA)、苯乙烯磺酸钠(SSS)和马来酸酐(MA)为单体,以水为溶剂,过硫酸铵作引发剂,合成了衣康酸-苯乙烯磺酸钠-马来酸酐(IA-SSS-MA)三元聚合物阻垢剂,考察了单体配比、反应温度、引发剂量、滴加时间等对聚合物阻碳酸钙垢效果的影响,结果表明:当单体配比为IA∶SSS∶MA=5∶1∶0。
2.
The scale inhibition of polimer IA-SSS was synthesized with itaconic acid(IA),styrene sulfonic sodium(SSS)as monomers,water as solvent,ammonium persulfate as initiator.
以衣康酸、苯乙烯磺酸钠为单体,以水为溶剂,过硫酸铵为引发剂,制得了衣康酸-苯乙烯磺酸钠二元聚合物阻垢剂。
3.
The copolymeric dispersant of acrylic acid-styrene sulfonic sodium-2-hydroxyethyl methacrylate was synthesized with acrylic acid(AA),styrene sulfonic sodium(SSS) and 2-hydroxyethyl methacrylate(HEMA) as monomers.
以丙烯酸(AA)、苯乙烯磺酸钠(SSS)和甲基丙烯酸羟乙酯(HEMA)为单体,经聚合反应得AA-SSS-HEMA三元共聚物钠盐分散剂,研究了其对BaSO4和农药莠去津的分散效果,用扫描电镜、光散射粒度分析仪等对分散后颗粒的表面形态及粒径分布进行表征。
补充资料：苯乙烯磺酸钠
分子式：C8H7NaO3S
分子量：206.19
CAS号：2695-37-6
性质：熔点300°C。
分子量：206.19
CAS号：2695-37-6
性质：熔点300°C。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条