1) reaction-melting infiltration sintering
反应熔渗烧结
1.
The MoSi2/SiC composite with a bending strength of 262MPa was prepared by reaction- melting infiltration sintering , and the corresponding sintering mechanism was studied.
采用反应熔渗烧结方法制备了弯曲强度达262 MPa的MoSi2/SiC复相材料,并研究了其烧结过程和烧结机理。
2) infiltration sintering
熔渗烧结
1.
Study on the reaction mechanism of Ti_3SiC_2 by melt infiltration sintering method
熔渗烧结制备Ti_3SiC_2反应机理的研究
3) infiltration and reaction sintering
浸渗反应烧结
4) reactive melt infiltrating Si
反应熔渗Si
5) reaction sintering
反应烧结
1.
Microstructure and properties of Mo_2FeB_2 cermets clad layer by reaction sintering;
反应烧结三元硼化物金属陶瓷覆层的组织与性能
2.
Densification of laser ignited reaction sintering of Ni-Al-Cu powder alloy;
Ni-Al-Cu粉末合金激光点火反应烧结的致密化研究
3.
The samples prepared by general sintering and reaction sintering are investigated by XRD,SEM and other testing means for their structure and performance.
采用常规烧结法和反应烧结法烧结制品,并利用XRD和SEM等测试手段对制品的结构与性能进行了分析研究。
6) reactive sintering
反应烧结
1.
Preparation of cemented carbide having highly oriented WC grains by reactive sintering of W-Co-Nano carbon tubes;
W-Co-纳米碳管反应烧结制备高度取向硬质合金
2.
Densification behavior during reactive sintering of compacted Ti/Al composite powders prepared by high energy ball milling;
高能球磨Ti/Al复合粉体的反应烧结致密行为
3.
Temperature model of reactive sintering of Ni Al thermal spray layer;
Ni-Al喷涂层中温反应烧结的温度变化模型
补充资料：难熔金属烧结法
分子式：
CAS号：
性质：俗称多层封接法。是一种常见的陶瓷-金属封接法。其工艺过程是在陶瓷表面上（欲封接部位）涂上一层金属粉膏（如钼、钼铁、钼锰或钼锰加氧化物等）经通氢炉烧结，使陶瓷体表面金属化，其上再电镀一层镍称为二次金属化。最后用银或银铜焊料连同金属件和金属化后的陶瓷件组装在一起在氢气炉中钎焊，便可获得陶瓷和金属封结件。该法封接强度高，气密性好，可连续大量生产。
CAS号：
性质：俗称多层封接法。是一种常见的陶瓷-金属封接法。其工艺过程是在陶瓷表面上（欲封接部位）涂上一层金属粉膏（如钼、钼铁、钼锰或钼锰加氧化物等）经通氢炉烧结，使陶瓷体表面金属化，其上再电镀一层镍称为二次金属化。最后用银或银铜焊料连同金属件和金属化后的陶瓷件组装在一起在氢气炉中钎焊，便可获得陶瓷和金属封结件。该法封接强度高，气密性好，可连续大量生产。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条