1) strip element method
条元法
1.
The shape control for 900 mm HC mill was analyzed by using the emulation software of strip cold rolling control based on strip element method,and the strategy of shape and profile control was formed It has been shown by application that the accuracy of strip shape control is improved and the bending force on work rollers is decreased obviousl
采用开发的基于条元法冷轧带材板形分析与控制仿真软件 ,分析了 90 0 m m HC轧机板形控制特性 ,确定出该轧机的板形板凸度控制策略。
2.
A new strip element method－streamline strip element method is put forward.
提出一种新型条元法──流线条元法，按照金属的流动迹线将变形区划分为若干流线条元，并将其映射为矩形条元；构造了金属横向位移纵向分布的新模式──四次加三次曲线分布。
2) B-spline strip element method
B样条条元法
3) stream surface strip element method
流面条元法
1.
The three-dimensional plastic deformation of strip were analyzed by stream surface strip element method,the elastic deformations of rolls were analyzed by influence coefficient method,the analyzing and computing model of shape and crown of the strip rolled on 4-high CVC mill were established by combining them,and the rolling process of hot strip on 4-high CVC continuous mills was simulated.
采用流面条元法分析带材的三维塑性变形,影响系数法分析辊系的弹性变形,并将二者耦合,建立了4辊CVC轧机板形和板凸度的分析计算模型,并对4辊CVC热带钢连轧机的轧制过程进行了仿真。
2.
The three-dimensional plastic deformations of strip were analyzed by using the stream surface strip element method, the elastic deformations of the rolls were analyzed by using the influence coefficient method, the analyzing and computing models of shape and crown were established by combining them.
用流面条元法分析带材的三维塑性变形 ,用影响系数法分析辊系的弹性变形 ,将两者耦合 ,建立了四辊轧机板形和板凸度的分析计算模型。
4) finite strip method
有限条元法
1.
An improved finite strip method was developed, and a column shell curvilinear strip was constructed.
该方法所用位移基函数能描述剪弯型杆件的变形曲线,克服了传统有限条元法选用纯三角函数作为基函数导致基底剪应力为零的缺点。
5) combined finite strip-element method
混合条-元法
6) compound finite strip_element method
混合条元法
1.
By combining the displacement function of two_end fastened strip in finite strip method (FSM) with that of rectangular element in finite element method (FEM), the compound finite strip_element method is used to solve plane problems with mechanics of elasticity.
将有限条带法 (FSM)中两端固定条和有限单元法 (FEM)中矩形单元的位移函数相迭加 ,运用混合条元法来求解平面弹性力学问题 。
补充资料：《庆元条法事类》
宋宁宗赵扩时的法令汇编。八十卷。宋朝不断编纂各种法令汇编与类编。宋孝宗赵眘时，又开始编集《淳熙条法事类》，此后陆续修订。宋宁宗嘉泰二年(1202)，谢深甫等编集《庆元条法事类》成书，翌年，正式颁行。宋初《重详定刑统》基本照抄唐律，很多令文已不适用于宋代社会。宋时法令汇编唯有《庆元条法事类》残本传世，缺卷一，卷二，卷十八至二十七，卷三十三至三十五，卷三十八至四十六，卷五十三至七十二，共计四十四卷，又卷三亦为残卷。今存残本有职制、选举、文书、榷禁、财用、库务、赋役、农桑、道释、公吏、刑狱、当赎、服制、蛮夷、畜产和杂门,共十六门,各门之下又分若干类。尽管残本不足原书之半，仍保存了有关政治、经济、军事、刑法、服饰等各方面的法令，为研究宋史,特别是中国法制史的珍贵资料。不少令文,例如宋代形势户的法定含意等,仅见于该书。还须指出,《庆元条法事类》所载法令，未必都是通行或适用于当时的。例如该书卷四十八《赋役门·预买绢》所载北宋民间向官府预请和买本钱的种种规定，尽管早在南宋初已全部废弃，而谢深甫等编集《庆元条法事类》时，却仍不予删削。该书较好的版本是燕京大学图书馆藏版刊本。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条