1) Non-Quenching-Tempering Steel 12Mn2VB
12Mn2VB非调质钢
1.
An Improvement on Surface Quality of Non-Quenching-Tempering Steel 12Mn2VB;
12Mn2VB非调质钢材表面质量的改善
2) 12Mm2VB steel
12Mn2VB钢
3) microalloyed steel
非调质钢
1.
Prediction models of austenite dynamic recrystallization of medium-carbon microalloyed steel during forging process;
非调质钢锻造过程奥氏体动态再结晶模型的建立
2.
In order to lower the flow stress in the cold heading process,the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied.
为了降低冷作强化非调质钢冷镦变形的变形抗力,研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
3.
A martensitic microalloyed steel was prepared by addition of low carbon and suitable alloying elements such as Mn, Si and Cr.
通过少量C与适量合金元素Mn、Si、Cr配合,制备了低碳马氏体型非调质钢。
4) non-quenched-tempered steel
非调质钢
1.
Study and applications of new microalloy non-quenched-tempered steel;
新型微合金非调质钢的研究
2.
Advance in Microalloying Non-Quenched-Tempered Steels for Auto;
汽车用微合金化非调质钢的进展
5) non-quenched and tempered steel
非调质钢
1.
Effect of Ti-containing complex inclusions on the microstructure and mechanical properties of medium carbon non-quenched and tempered steel;
含Ti复合夹杂物对中碳非调质钢组织和力学性能的影响
2.
Precipitation behavior of Ti-deoxidized products in non-quenched and tempered steel;
非调质钢中钛脱氧产物析出行为
3.
Metallurgical behavior of titanium oxides in non-quenched and tempered steel;
非调质钢中钛氧化物冶金行为
6) non quenched and tempered steel
非调质钢
1.
Refining and forging experiments of non quenched and tempered steel containing sulphur were carried out in laboratory.
在实验室对含硫非调质钢进行了冶炼和锻压实验,结果表明:随钢凝固速率的增加,钢中硫化物夹杂的尺寸减小而数量增多;随锻压压缩比的增加,硫化物夹杂碎裂而变得细小;在950℃锻压时硫化物的塑性最好,在1 250℃时硫化物的塑性较好,在1 050~1 150℃之间硫化物的塑性较差;随着加热时保温时间的延长,硫化物夹杂的数量减少而尺寸增大。
2.
The effect of rolling processes on microstructure and properties of non quenched and tempered steels for oil well tube with various composition was studied.
结果表明 ,中碳铁素体—珠光体型非调质钢完全满足 N- 80油井管的要求 ,在 95 0～ 85 0℃大压下量终轧有利于获得较高的韧
3.
A kind of economical non quenched and tempered steel, which is suitable for making the 2VQS engine crankshaft in Shanghai Volkswagen was developed.
开发了一种满足上海大众 2 VQS发动机曲轴用非调质钢。
补充资料：非调质钢
分子式：
CAS号：
性质：在轧制状态或正火状态下使用的高强度钢。其显微组织主要是铁素体和珠光体。提高非调质钢强度的方法，主要是通过添加合金元素和轧制，细化组织。常采用对于焊接性影响较小而又廉价的硅和锰作为非调质钢主要合金元素。通过控制轧制也可细化组织，提高非调质钢的强度和韧性。非调质钢的典型钢种有：(1)普通焊接结构用非调质钢，用途与软钢大致相同，包括桥梁、贮气罐、高压容器、建筑构件、升降机械和土木机械等；(2)造船用高强度钢；(3)煤气管道用高强度钢。
CAS号：
性质：在轧制状态或正火状态下使用的高强度钢。其显微组织主要是铁素体和珠光体。提高非调质钢强度的方法，主要是通过添加合金元素和轧制，细化组织。常采用对于焊接性影响较小而又廉价的硅和锰作为非调质钢主要合金元素。通过控制轧制也可细化组织，提高非调质钢的强度和韧性。非调质钢的典型钢种有：(1)普通焊接结构用非调质钢，用途与软钢大致相同，包括桥梁、贮气罐、高压容器、建筑构件、升降机械和土木机械等；(2)造船用高强度钢；(3)煤气管道用高强度钢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条