1) pattern block
花纹块
1.
According to the pattern shape and the pattern block stiffness, the extracting method of pattern block mold profile is discussed.
根据轮胎花纹的形状和花纹块的刚度 ,阐述了从轮胎图提取出花纹块模具轮廓的方法 ;按照工艺要求 ,研究了设计模具型腔并适当调整型腔形状的方法。
2.
The pattern of the tyre of agricultural vehicles has to fit in with the inclement working situations of the vehicles,which brings some difficulty to the pattern block mold design of the tyre.
文章介绍了农用轮胎的特点和轮胎模具的生产流程,然后结合轮胎花纹块的铸造、抛光、机械加工等工艺要求,阐述了农用轮胎花纹块模具设计方法并导出计算公式,内容包括:径向断面的工艺尺寸设计、轴向与周向的展开与弯曲设计;提出采用Coons曲面构造出模具内腔壁曲面的方法。
2) tread block
花纹块
1.
Study on distortion measuring system for tire tread block and carcass under stresses;
受力轮胎花纹块与胎体变形量测试系统的研究
2.
The results showed that the higher the vehicle speed,the lower the inflation pressure of tire and the higher the density of tread blocks,the greater the sound levels of the noise from tread bolcks;the larger the volume of tread grooves,and the higher speed and load of vehicle,the greater the sound levels of the noise from tread grooves.
分析得出 ,车速越快、轮胎充气量越小、花纹块的密度越大 ,花纹块的噪声声压越大 ;花纹槽的腔体积、车速和汽车载质量越大 ,花纹槽的噪声声压越大。
3) tread pattern mold
花纹块模具
1.
Cavity surface construction of tyre tread pattern mold and its finish machining;
轮胎花纹块模具型腔曲面构造及数控加工
4) non-small block patterns
非小块状花纹
1.
Based on the sound-generating charateristics of smooth tread,ribbed patterns and block patterns of tires,the original sound-generating model was revised,a physical model suitable for sound-generating test of tire with non-small block patterns was proposed,the relative programmes BPTNS and BPODS were worked out,and the accuracy of the model was confirmed by the simulation test.
根据光面轮胎、条状花纹和大块状花纹的发声特点,对原来的发声模型进行修正,提出了适用于非小块状花纹的发声试验物理模型,并编制相关程序BPTNS和BPODS,仿真试验验证了模型的准确性。
5) Big block pattern
大块状轮胎花纹
6) tread band lugging
胎面花纹块翻新
补充资料：胎面花纹块翻新
分子式：
CAS号：
性质：这是翻新轮胎的一种方法，指先打磨除去已损坏的胎面花纹块，用手工粘贴上未硫化或预硫化的花纹块，然后将轮胎置于硫化罐内硫化的方法，俗称耳翻。此法适用于拖拉机后轮用胎及工程机械轮胎的翻新。
CAS号：
性质：这是翻新轮胎的一种方法，指先打磨除去已损坏的胎面花纹块，用手工粘贴上未硫化或预硫化的花纹块，然后将轮胎置于硫化罐内硫化的方法，俗称耳翻。此法适用于拖拉机后轮用胎及工程机械轮胎的翻新。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条