1) DMC polyether polyols
DMC聚醚
1.
DMC polyether polyols, with excellent quality compared with conventional polyethers, were prepared by ring-opening polymerization of propylene oxide (PO) using double metal cyanide complex (DMC) catalysts.
结果表明,采用调节剂后加入法,不仅可减少产物中高分子量组分的含量,而且可直接使用来源更广的小分子有机物取代低聚醚作调节剂,得到低不饱和度的DMC聚醚,解决了DMC催化PO过程中存在的"用聚醚合成聚醚"的问题。
2.
DMC polyether polyols, prepared by the polymerization of propylene oxid with dimetallic catalyot, have been found to suffer obvious degradation and decrease their viscosity and molecular weight during storage.
研究DMC聚醚 (双金属催化剂的聚环氧丙烷 )的降解现象 。
2) DMC/AM copolymer
DMC/AM共聚物
1.
The results show that the introduction of AMPS can increase the viscosity residual of DMC/AM copolymer significantly, by up to 50%, or at least 40% even under high temperature of 90℃, it can .
用过硫酸盐氧化还原引发体系通过水溶液聚合法在一定条件下合成了作阳离子絮凝剂用的DMC/AM共聚物 ,研究了作为第三单体AMPS的引入对原共聚物性质的影响。
3) PEEK
[英][pi:k] [美][pik]
聚醚醚酮
1.
Synthesis and characterization of PEEK;
工程塑料聚醚醚酮的合成与表征
2.
Tribological behavior of PEEK composites filled with various surface modified whiskers;
晶须表面改性及其填充聚醚醚酮摩擦学行为
4) polyetheretherketone
聚醚醚酮
1.
Polyetheretherketone (PEEK) is a super thermal engineering plastic material which has significant performances , particularly in respects of fracture toughness, damage tolerance and resistance to hot, and wet environments.
聚醚醚酮树脂在复合材料中呈现典型的球状结构,这种晶体结构发生在树脂相或纤维表面,导致聚醚醚酮基体和碳纤维之间存在良好的界面结合力。
2.
The basic physical and chemical properties of polyetheretherketone(PEEK) composites are presented and the research progresses on tribological behaviors of particle filled,fiber reinforced and plasma treaded PEEK composites are reviewed.
介绍聚醚醚酮(PEEK)的基本物理化学性能,评述粒子填充、纤维增强、有机-无机共混和等离子处理PEEK复合材料的摩擦磨损性能研究进展,指出今后应加强对多因素协同作用下PEEK复合材料磨损机理、开展PEEK复合材料微观摩擦学及生物摩擦学方面的研究。
3.
The friction and wear behavior of polyetheretherketone(PEEK) composites reinforced with carbon fibers was investigated on the abrasion tester under dry sliding against 45* steel disc at room temperature.
用磨损试验机对碳纤维增强聚醚醚酮(PEEK)复合材料进行室温干滑动磨损试验,考察了碳纤维的含量、石墨润滑剂、对磨时间及载荷对材料磨损量及摩擦系数的影响,并用电子显微镜对其磨损表面进行了观察与分析,同时对材料的磨损机理进行了探讨。
5) poly(ether ether ketone)
聚醚醚酮
1.
Dynamic Mechanical Properties of Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮的动态力学性能
2.
Synthesis of Crosslinkable Fluorinated Poly(ether ether ketone);
可交联含氟聚醚醚酮的合成
3.
Dynamic Rheological Behavior for Controllable Cross-linking Poly(ether ether ketone)s;
可控交联聚醚醚酮动态流变学行为的研究
6) poly (ether ether ketone)
聚醚醚酮
1.
Fluorinated poly (ether ether ketone) for the fabrication of 32-channel arrayed waveguide grating multiplexer;
用于32通道阵列波导光栅的氟化聚醚醚酮
2.
A novel poly (ether ether ketone) derived from 4,4'-diflourodiphenylketone, bisphenol-S and 2-(6-oxide-6H-dibenz <1,2> oxa phosphorin-6-yl) -1,4-dihydroxy-phenylene was synthesized by solution polycondensation.
以9,10-二氢-9-氧杂-10-磷酰杂菲-对苯二酚(DOPO-HQ),4,4’-二氟二苯甲酮(DFK)和双酚S(DDS)为单体,通过溶液缩聚合成了含磷双酚S型聚醚醚酮。
3.
Poly (ether ether ketone) (PEEK), a high-temperature resistant thermoplastic resin, has been used in a lot of fields because of its excellent properites.
聚醚醚酮(PEEK)具有突出的耐高温水解和耐辐照性能以及良好的断裂韧性,现已在核能、宇航等高技术领域得到应用。
补充资料：聚氯醚,氯化聚醚
CAS：25323-58-4
分子式：(C5H8Cl2O)x
中文名称：聚3,3-双(氯甲基)丁氧环；氯化聚醚；聚氯醚,氯化聚醚
英文名称：Poly 3,3-bis(chloromethyl)oxetane；Chlorinated polyether；3,3-bis(chloromethyl)-oxetan homopolymer
分子式：(C5H8Cl2O)x
中文名称：聚3,3-双(氯甲基)丁氧环；氯化聚醚；聚氯醚,氯化聚醚
英文名称：Poly 3,3-bis(chloromethyl)oxetane；Chlorinated polyether；3,3-bis(chloromethyl)-oxetan homopolymer
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条