1) low temperature solid-state extrusion
低温固相挤出
1.
This polymer alloy is prepared by low temperature solid-state extrusion and reactive extrusion.
简要介绍了该聚合物合金的加工过程,其主要工艺是通过低温固相挤出和反应挤出制备。
2) solid-state extrusion
固相挤出
1.
A novel solid-state extrusion methodology for recycling poly(ethylene terephthalate) (PET) was proposed.
提出一种全新的固相挤出加工方法,即在低温下用双螺杆挤出机挤出加工回收聚对苯二甲酸乙二醇酯(PET)。
2.
The research development of r-PET modification technique was summarized from five aspects: increase viscidity modification,solid-state extrusion modification,simple mixing modification,reactive modification,and modification by adding compatibilizer.
从增黏改性、固相挤出法改性、共混改性、反应改性和增容改性等几个方面论述了聚对苯二甲酸乙二醇酯(PET)瓶回收料改性技术的研究进展。
3) low-temperature extrusion process
低温挤出成形
1.
Porous tubular scaffolds were manufactured by extruding the gel with thermally induced phase separation in a low-temperature extrusion process.
将数字挤压/喷射技术与热致相分离技术结合,提出了一种新型多孔管状支架成形技术——低温挤出成形技术。
4) solid-state method
低温固相法
1.
Nano-sized MgO were prepared by a solid-state method at lower temperature using MgCl2·6H2O and H2C2O4·2H2O as raw materials and soluble starch and PEG1000 as dispersing agents.
以氯化镁和草酸为原料,分别以淀粉和聚乙二醇1000为分散剂,采用低温固相法制备出不同形貌的纳米氧化镁。
5) Low temperature solid state reaction
低温固相反应
1.
The results show that the NiFe2O4 nano-sized crystal can be obtained easily and uniformly by microwave radiated low temperature solid state reaction.
结果表明:采用微波辐射低温固相反应法能够快速且均匀地制备出结构单一的NiFe2O4尖晶石纳米晶,当微波辐射功率为700 W、辐射时间为16 min、研磨时间为20 min时,所制备的NiFe2O4尖晶石纳米晶,其晶粒呈圆片状,晶粒尺寸约为30 nm,颗粒均匀性最好,且粉体不易团聚。
6) Low temperature solid-state processing
低温固相加工
补充资料：低固相钻井液
分子式：
CAS号：
性质：是一种水基钻井液。固相总含量在6％～10％(V/V)范围内，其中膨润土含量控制在3％或更低，钻屑与膨润土之比小于2:1(V/V)。
CAS号：
性质：是一种水基钻井液。固相总含量在6％～10％(V/V)范围内，其中膨润土含量控制在3％或更低，钻屑与膨润土之比小于2:1(V/V)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条