1) low-temperature forging
低温锻造
1.
Analysis of familiar defects of low-temperature forging on operating instruments;
手术器械低温锻造常见缺陷原因分析
2) cold acclimation
低温锻炼
1.
The effects of cold acclimation on leaf physiological traits in rice seedlings;
苗期低温锻炼对水稻叶片生理性状的影响
2.
Protein expression of two Spiraea species under effects of cold acclimation and de-acclimation
两种绣线菊低温锻炼与脱锻炼处理对蛋白质表达的影响
3.
Whether or not cucumber seedling accepted cold acclimation had intimate connection with chilling tolerance of cucumber seedling before cold acclimation.
幼苗承受低温煅炼的能力与锻炼前的抗冷能力密切相关 ,低温锻炼应逐步进行 ,先在昼温 2 5～30℃ ,夜温 1 3～ 1 5℃下育苗 ,积累抗冷保护物质 ,然后在昼温 1 5～ 2 5℃ ,夜温 5～ 6℃条件下锻炼 4～ 6d ,抗冷性能进一步提高 。
3) cold-hardening
低温锻炼
1.
Increment of Chilling Tolerance and Its Physiological Basis in Chilling-sensitive Corn Sprouts and Tomato Seedlings after Cold-hardening at Optimum Temperatures;
适宜低温锻炼提高冷敏感植物玉米和番茄的抗冷性及其生理基础
2.
Seedling freezing tolerance increased after 15 d of cold-hardening.
本研究以沙冬青(Ammopiptanthus mongolicus)幼苗为实验材料,测定低温锻炼和脱锻炼期间沙冬青幼苗子叶和根部相关生理生化指标的变化,以揭示沙冬青抗寒性形成的生理基础。
4) freezing acclimation
低温锻炼
1.
Low temperature signal in woody plants,Populus davidiensis cuttings after being treated with CaCl_2,Ca~(2+) chelator EGTA,Ca~(2+) channel inhibitor LaCl_3 or CaM antagonist CPZ were used for freezing acclimation.
以零下低温锻炼和结合效应剂(CaCl2、钙离子螯合剂EGTA、钙离子通道阻断剂LaCl3或钙调素拮抗剂CPE)处理的低温锻炼下的中东扬扦插苗为试材,对其体内丙二醛(MDA)及钙调素CaM含量,SOD、POD及线粒体Ca2+-ATPase活性分别进行测定。
2.
49) in the enhancement of freezing resistance induced by freezing acclimation, G6PDH was purified from the leaves of 8-week-old Populus suaveolens cuttings.
对-20℃低温锻炼及脱锻炼过程中甜杨 (Populus suaveolens)幼苗的G6PDH、SOD和POD 活性、MDA含量和半致死温度(LT50)进行了测 定和分析。
3.
To explore the role of calcium-calmodulinmessenger system in the transduction of low tempera-ture signal in woody plants, Populus tomentosa cut-tings after being treated with CaCl2 (10 mmol/L), Ca2+chelator EGTA (3 mmol/L), Ca2+ channel inhibitorLaCl3 (100 mmol/L) or CaM antagonist CPZ (50 mmol/L) were used for freezing acclimation at -3℃.
以零下低温锻炼和结合效应剂(CaCl2、钙离子螯合剂EGTA、钙离子通道阻断剂LaCl3或钙调素拮抗剂CPZ)处理的低温锻炼下的毛白杨(Populus tomentosa)扦插苗为试材,对其体内丙二醛(MDA)及钙调素(CaM)含量,超氧化物歧化酶(SOD)、过氧化物酶(POD)及线粒体腺苷三磷酸酶(Ca2+-ATPase)活性,以及幼苗的半致死温度(LT50)分别进行测定。
5) isothermal forging
等温锻造
1.
Design of heating device for magnesium alloy isothermal forging and temperature curve of die;
镁合金等温锻造加热装置的设计及模具温度曲线
2.
Numerical simulation of grain size during isothermal forging of TC6 alloy;
TC6合金等温锻造过程中晶粒尺寸的数值模拟
3.
Simulation of Isothermal Forging for Superalloy and Analysis of Thermal Load on Die;
粉末高温合金盘件等温锻造模拟及模具热负荷分析
6) forging temperature
锻造温度
1.
Using TA5 ingot with α/α+β transformation temperature of 990-1 000 ℃ by two times melting,the tests for forging temperature and reduction were performed.
采用二次真空熔炼熔铸的α/α+β转变温度为990￣1000℃的TA5钛合金,在β相区开坯,经多火次中间锻造后,对其最后一火次的锻造,改变锻造温度和变形量共8种工艺方案进行实验,考察锻造温度和变形率对组织和性能的影响。
2.
According to the forging blank requirements of a magnesium alloy shell,the parameters such as forging temperature,furnace holding time,clamping board temperature of the forging machine,forging time and so on of MB2 magnesium alloy forged on the general forging machine are determined by experiments.
根据某壳体零件锻造毛坯的要求,通过试验确定了MB2镁合金在普通锻床上锻造时的锻造温度、炉膛保温时间、锻床夹板温度、锻打时间等工艺参数,为制订该合金的锻造工艺提供了依据。
补充资料：20t压力电渣重熔炉(德国联合锻造公司)
20t压力电渣重熔炉(德国联合锻造公司)
麟20t压力电渣重熔炉(德国联合锻造公司)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条