1) intermediate temperature creep
中温蠕变
2) Room temperature creep
室温蠕变
1.
Room Temperature Creep and Its Effect on Fatigue Crack Growth of Structural Steels;
结构钢的室温蠕变及其对疲劳裂纹扩展的影响
2.
Room temperature creep at crack tip of a 0Cr18Ni9 stainless steel and its effect on the following fatigue crack growth have been investigated.
研究0Cr18Ni9不锈钢裂纹尖端的室温蠕变(room temperature creep,RTC)现象以及其对恒ΔK条件下疲劳裂纹扩展行为的影响作用。
3.
The phenomenon of room temperature creep(RTC) deformation and its effect on subsequent flow stress under various loading stress rate(Lsr) and loading process in a X70 pipeline steel were studied.
利用MTS万能试验机研究了X70管线钢在不同应力加载速率和不同加载过程下的室温蠕变现象,以及室温蠕变对流变应力的影响。
3) creep
[英][kri:p] [美][krip]
高温蠕变
1.
MSP testing has been used to evaluate high-temperature mechanical properties of MoSi_2 based composites including high-temperature strength,brittle-to-ductile transition temperature and creep resistance.
对MoSi_2系复合材料高温蠕变测试表明,MSP试验法得到的蠕变曲线和传统方法类似,而且随着氧化物添加相含量的增加,复合材料的高温蠕变性能下降。
2.
Inorder to improve the poor high temperature creep resistant property of AZ91, the development of high temperature creep resistant die-casting magnesium alloys were carried out.
针对商用压铸镁合金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在AZ91D合金成本的15%以内。
3.
According to bad high temperature creep resistant property and on the base of AZ91,the development of high temperature creep resistant die-casting magnesium alloys were carried out in this paper.
针对商用压铸镁各金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在 AZ91D 合金成本的15%以内。
4) high temperature creep
高温蠕变
1.
Effect of zinc content on high temperature creep property of AZ31 magnesium alloy;
AZ31镁合金中Zn含量对其高温蠕变性能的影响
2.
Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
3.
The research progress of the high temperature creep and creepmechanism of carbon/carbon composites and carbon fibres at home and abroad are reviewed in this paper.
综述了国内外对碳/碳复合材料及碳纤维的高温蠕变及蠕变机理的研究情况。
5) elevated temperature creep
高温蠕变
1.
The elevated temperature creep characteristics of composites and ZL109 alloy at different test temperatures and stresses were studied.
用加压铸造法制取Al2 O3 SiO2 系纤维增强ZL10 9合金复合材料 ,研究了在不同温度和不同试验应力下复合材料和ZL10 9合金的高温蠕变特性。
6) creep temperature
蠕变温度
1.
The converter shell temperature can be controlled within 360 ℃, which is lower than the creep temperature of shell material.
对重钢50t转炉进行了炉壳(炉身段)温度场分析,计算表明:转炉隔热层石棉板的厚度为30mm时,炉壳温度就能控制在360℃以内,低于炉壳材质的蠕变温度。
2.
Results showed that design of steel structure part working at creep temperature up must be calculated with creep theory, design of steel structure part working at creep temperature down must be calculated with elastic deformation theory.
对高温工况下钢结构以弹性变形与蠕变理论进行设计计算作了实例比较 ,结果表明 :对超过蠕变温度的构件应按蠕变理论计算 ;对低于蠕变温度工作的构件则应按规范的弹性理论计算。
3.
It must consider the affection of fatigue and creep to the crack growth for the nuclear pipes in the high temperature reactors(as fast reactor) beyond the creep temperature.
对于在蠕变温度以上高温堆(如快堆)的核级管道,运用LBB分析时应考虑疲劳和蠕变对裂纹扩展的影响。
补充资料：春暮过石龟谷题温处士林园（一作送温逸人）
【诗文】：
隐几无名老，何年此陆沈。丘园自得性，婚嫁不婴心。
岁计因山薄，霞栖在谷深。设罝连草色，晒药背松阴。
触兴云生岫，随耕鸟下林。支颐笑来客，头上有朝簪。
【注释】：
【出处】：
全唐诗：卷238_41
隐几无名老，何年此陆沈。丘园自得性，婚嫁不婴心。
岁计因山薄，霞栖在谷深。设罝连草色，晒药背松阴。
触兴云生岫，随耕鸟下林。支颐笑来客，头上有朝簪。
【注释】：
【出处】：
全唐诗：卷238_41
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条