1) modulus lead screw
模数丝杠
1.
Adopting special lantern gear to minify the drive error of the screw drive chain on CA6140 lathe,high-precision inch-system lead screw and modulus lead screw can be processed.
采用专用挂轮,减小了CA6140螺纹传动链的传动误差,可加工出高精度英制丝杠和模数丝杠。
2) counting screw
计数丝杠
1.
The bar is bited into counting screw regularly.
针对钢铁棒材生产工艺现状,分析了棒材传输过程中的运行规律,采用挡钢轮、拨筋爪等预处理装置解决了棒材的严重交叉和重叠现象;使棒材有规律的咬入计数丝杠,到达了在线精确计数的目的。
3) NC leadscrew tapping
数控丝杠攻丝
5) lead screw
丝杠
1.
Based on the analysis of the pitch error measure theorem for screw,the dynamic measure system of pitch error for lead screw constituted by single-chip microcomputer is discussed.
在分析丝杠螺距误差测量基本原理的基础上,简述了由单片微机组成的滚珠丝杠螺距误差动态测试系统,并开发了计算机辅助自动分析测控软件。
2.
The reason of different surface quality between two sides of groove while whirlwind milling the lead screw is analyzed, and the special facing cutter for milling the lead screw is designed.
分析了旋风铣削丝杠螺纹时牙槽两侧表面质量差异的原因 ,设计了加工丝杠螺纹的专用铣刀
3.
This paper has a study on error compensation theory of lead screw transmission and discuss the method to measure the screw error and establish the error compensation table.
研究了数控机床丝杠传动误差补偿原理 ,探讨了丝杠误差测量及制订误差补偿表的方法 ,实现了数控机床丝杠误差正反双向补偿功能 ,提高了机床定位精
6) Screw
[英][skru:] [美][skru]
丝杠
1.
Conditions of Effect of Screw Torsion Deformation to Transmission Rigidity;
丝杠扭转变形对传动刚度影响的条件
2.
Influence of Torsion Deformation of the Screw on Electromechanical Rigidity;
滚珠丝杠扭转变形对机电综合传动刚度的影响
补充资料：传动：模数
相邻两轮齿同侧齿廓间的齿距t与圆周率π的比值(m＝t/π)﹐以毫米为单位。模数是模数制轮齿的一个最基本参数。模数越大﹐轮齿越高也越厚﹐如果齿轮的齿数一定﹐则轮的径向尺寸也越大。模数系列标準是根据设计﹑製造和检验等要求制订的。对於具有非直齿的齿轮﹐模数有法向模数mn﹑端面模数ms与轴向模数mx的区别﹐它们都是以各自的齿距(法向齿距﹑端面齿距与轴向齿距)与圆周率的比值﹐也都以毫米为单位。对於锥齿轮﹐模数有大端模数me﹑平均模数mm和小端模数m1之分。对於刀具﹐则有相应的刀具模数mo等。标準模数的应用很广。在公制的齿轮传动﹑蜗杆传动﹑同步齿形带传动和棘轮﹑齿轮联轴器﹑花键等零件中﹐标準模数都是一项最基本的参数。它对上述零件的设计﹑製造﹑维修等都起著基本参数的作用(见圆柱齿轮传动﹑蜗杆传动等)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条