1) deformation texture
形变织构
1.
The difference of deformation texture in two alloy sheets was analyzed by means of X-ray orientation distribution function (ODF).
对比研究2090和2090+Ce铝锂合金板材沿轧向、横向和45°方向屈服强度的变化,采用ODF测试分析了两合金板材形变织构的差异。
2.
The influence of the cold rolling lubricants on the deformation texture in high-purity aluminium was investigated in details by ODF 's (Orientation Distribution Functions).
采用ODF法（晶体取向分布函数法）研究和分析了润滑剂对高纯铝冷轧形变织构的影响,揭示了两种润滑条件下形变织构的演变规律。
2) deformation texture
变形织构
1.
The results show that the deformation texture of 1420 alloy plate is enhanced with trace Er added in,and the enhancement of brass texture B{011}<211> is the most prominent,which is attributed mainly to the effect of Er on decreasing fault energy of 1420 alloy and the high interaction energy between Er and dislocation.
结果表明,微量Er能够增强1420合金板材变形织构,其中黄铜织构B{011}<211>增强最为明显,其主要原因是加入微量Er可降低1420合金的层错能,同时Er与位错之间存在较高的交互作用能。
2.
With the different Er additions,the tensile properties of under-aged 1420 alloy at different directions are tested,and the deformation texture and microstructure of the alloy observed,the effects and mechanisms of Er on the anisotropy of mechanical properties of 1420 alloy is studied.
通过测试与观察不同Er含量情况下,欠时效态1420合金板材的不同取向拉伸性能、变形织构和显微组织,研究了Er对1420合金板材力学性能各向异性的影响及其机制。
3.
The results show that trace elements can change the deformation textures of high purity aluminium.
研究结果表明 :添加微量稀土和铍 ,能改变高纯铝箔变形织构组分含量 ,单独加稀土时 ,形变织构变化不大 ;在单独加铍时 ,其S取向 { 12 3} <6 34 >和Cu取向 { 112 } <111>变化较大 ,随铍含量增加 ,其S取向密度f(g)减少 ,Bs{ 110 } <112 >取向密度增加 。
3) texture
[英]['tekstʃə(r)] [美]['tɛkstʃɚ]
变形织构
1.
Effect of lubrication on evolution of through thickness texture in cold rolled 3104 aluminum alloy sheets;
润滑对3104铝合金板变形织构的影响
2.
This works comparatively investigated the difference of texture in two alloy plates of 2090 and 2090 added trace rare earth element cerium at solid solution by using X ray diffraction analysis.
利用Ｘ 射线衍射分析仪对比研究了２０９０ 和２０９０ ＋ 微量稀土元素素铈（Ｃｅ） 两种铝锂合金板材，在固溶状态下变形织构的差异。
4) deformation textures
变形织构
1.
The experimental results showed that a small addtion of Be to high-purity aluminium can change the deformation textures.
结果表明：在高纯铝中添加微量铍，变形织构组分的强弱发生变化，随铍含量的增加，Ｓ织构和Ｃ织 构组分减弱，ＢＳ织构的铍含量为０。
5) texture evolution
织构演变
1.
The concept of texture configuration entropy is introduced into the computer simulation on texture evolution of polycrystalline films.
将织构组态熵的概念应用于沉积多晶薄膜织构演变的模拟研究，考虑薄膜沉积过程中晶体表面能各向异性及应变能各向异性的变化，建立了沉积薄膜晶体择优生长的定量模型；模拟了Al多晶薄膜沉积过程中晶体的生长规律，分析了织构演变的主要微观物理因素。
6) texture transformation
织构相变
补充资料：形变织构
deformationtexture：由于冷变形加工所造成的织构。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条