1) oil filled MC nylon
含油铸型尼龙
1.
The composite material oil filled MC nylon with glass beads as the filler was prepared.
以玻璃微珠为填料制备了玻璃微珠填充改性含油铸型尼龙复合材料,研究了复合材料的摩擦学性能和热性能。
2.
The mechanical properties of glass beads modifing oil filled MC nylon were investigated.
研究了玻璃微珠改性含油铸型尼龙复合材料的力学性能。
2) monomer casting nylon
铸型尼龙
1.
The formation of PAM molecules in monomer casting nylon 6 (MC Nylon) was characterized by means of FT-IR and UV spectra.
DSC和TGA热分析结果表明,PAM的加入,对尼龙6的结晶起了诱导结晶作用,但未改变铸型尼龙的α晶型、球晶结构,而热稳定性提高;m(PAM)/m(PA6)(5%)复合材料的动态力学谱图上,只出现一个玻璃化转变温度(Tg),说明两者有很好的相容性,且Tg值较尼龙6的提高了9℃。
2.
The processing and applications of colouring oily monomer casting nylon were introduced.
介绍了彩色油性铸型尼龙的加工应用技术。
3) MC nylon
铸型尼龙
1.
In this paper the synthetic method for MC nylon modified with laurolactam is presented.
介绍了十二内酰胺改性铸型尼龙的制备方法 ,在绝热条件下通过活化阴离子共聚制得己内酰胺与十二内酰胺共聚体 。
2.
Based on the analysis of the existing drawback for MC nylon, a project of solution in anti-frication, toughening, pore-reducing and heat resistance was worked out.
通过对铸型尼龙(MC尼龙)制备工艺中存在问题的分析,在减磨、增韧、减少气孔和耐热性的提高等方面提出了解决方案。
3.
Because of the peculiarity of the MC nylon's polymerization and the two-way rotational process, some irregular parts of the hollow container which is made by these technique can't meet the technical requirement if we only use general mold design for those irregular parts.
根据铸型尼龙的聚合特征及其双向回转成型的特点,对其中空制品不规整局部(制品局部的内凹、外凸、开口和加厚部位),采取不同热容金属进行组合或复合、特定的排气结构以及尖角状开口分离模板等方式,对模具进行特殊设计,并与常规设计模具的成型效果作了对比。
4) casting nylon
铸型尼龙
1.
DSC and TGA thermal analysis demonstrated that the addition of PAM functioned as inducing crystallization for the crystallization of PA6,but kept the x-crystals of casting nylon 6 unchanged.
DSC和TGA热分析结果表明 ,PAM的加入对PA6的结晶起了诱导结晶作用 ,但没有改变铸型尼龙的α晶型结构 ,结晶形态仍为球晶结构 ;PAM /PA 6( 5 % )材料的动态力学谱图上 ,只出现了一个玻璃化转变温度 ,较PA6的提高了 5℃。
5) monomer cast Nylon
铸型尼龙
1.
The tribological properties of monomer cast nylon(MC nylon) and its composites under dry friction and water lubrication were investigated on a MM 200 model friction and wear testing machine, and the physical and chemical transformations of materials with different wear conditions were analyzed using infrared spectroscopic analysis.
利用 MM- 2 0 0摩擦磨损试验机研究了在干摩擦和水润滑条件下铸型尼龙 (MC尼龙 )及其复合材料的摩擦磨损性能 ,并利用红外光谱分析了材料在不同磨损条件下发生的物理化学变化。
补充资料：铸型尼龙
分子式：
CAS号：
性质：亦称铸型尼龙(cast nylon)。将己内酰胺(或其他内酰胺)熔融后加入催化剂和助催化剂，迅速均匀浇铸于预热的模具内，在惰性气体环境中使之开环聚合制得的浇铸制品。熔点198℃，拉伸强度75～97MPa，拉伸弹性模量240～310MPa，压缩强度96～104MPa，弯曲强度>95MPa，冲击强度(缺口)约5kJ/m2，洛氏硬度R95～120，热变形温度(0.45MPa)204～218℃。主要用于尼龙大型制品，少量多品种制品，如制作滑动轴承、齿轮、大型阀座、导轨、容器等。
CAS号：
性质：亦称铸型尼龙(cast nylon)。将己内酰胺(或其他内酰胺)熔融后加入催化剂和助催化剂，迅速均匀浇铸于预热的模具内，在惰性气体环境中使之开环聚合制得的浇铸制品。熔点198℃，拉伸强度75～97MPa，拉伸弹性模量240～310MPa，压缩强度96～104MPa，弯曲强度>95MPa，冲击强度(缺口)约5kJ/m2，洛氏硬度R95～120，热变形温度(0.45MPa)204～218℃。主要用于尼龙大型制品，少量多品种制品，如制作滑动轴承、齿轮、大型阀座、导轨、容器等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条