1) narrow strip
窄带钢
1.
Prediction of the roll slot and thickness difference from the front to the end of narrow strip in hot rolling;
热轧窄带钢辊缝预设及头尾厚差预报
2.
Technology reformation of cold narrow strip rolling;
冷轧窄带钢生产的技术改造
3.
The current situation of narrow strip production in China was analyzed.
对目前我国窄带钢生产现状进行了分析,认为窄带钢生产既具有一定优势,也面临巨大挑战。
2) narrow strip steel
窄带钢
1.
This paper discusses the factors influencing the precision of width tolerance of continuous hot rolled narrow strip steel, and introduces the effective method of producing strip steel with highprecision width tolerance on general halfcontinuous hot strip mills
讨论了影响热连轧窄带钢宽度公差精度的因素，介绍了在一般半连轧热带钢机组上生产宽度公差高精度带钢的有效方法。
2.
The adjustment of loops in hot rolling of narrow strip steel is an important factor which influences the quality of narrow strip steel.
热轧窄带钢活套调节是影响窄带钢质量的重要问题之一。
3.
The production capacity competition of the national narrow strip steel is developing from the less kinds of steel,the narrow and thick size to the high ratio of quality strip,wide and thin size.
国内窄带钢生产能力的竞争已由原来的钢种少、规格偏于窄和厚逐步向优钢比高、规格偏于宽且薄的方向发展。
3) Q195 narrow steel strip
Q195窄带钢
1.
In light of the quality problems of skin formation,pitting and so on of Q195 narrow steel strips during cold rolling,based on production practice,follow-up tests on billet surface,macro-examination,strip surface pickling were specially made.
根据莱钢低碳Q195窄带钢在冷轧中出现起皮、麻点等质量问题,基于生产实践安排了专门的铸坯表面、低倍、带钢表面酸洗跟踪试验,通过成分、金相、裂纹、夹杂以及扫描电镜分析,对影响带钢表面质量的问题进行了深入探讨。
4) super-narrow steel band
超窄钢带
1.
Intoduction is done to the two main methods of processing super-narrow steel band as well as the process advantage.
介绍了超窄钢带的两种主要生产方式及其优点,主要研究了纺织器材专用高精度超窄钢带的平辊压扁轧制成型工艺,重点探讨了圆钢丝压扁轧制的变形特点,分析了钢丝在压扁轧制中的变形规律和压力分布情况,总结了目前用于计算宽展的公式,通过试验数据验证,M。
5) hot narrow strip
热轧窄带钢
1.
The processing schemes of roughing mills reformation of hot narrow strip plant were put forwardThe selection principles of reformation were introducedMeanwhile,some problems about reformation design and the development direction of hot narrow strip were put forward
提出了热轧窄带钢车间粗轧机组改造的工艺方案,介绍了选择方案的原则,并对改造设计中某些问题和今后窄带钢发展方向提出了一些看法。
6) Hot Rolled Narrow Strip
热轧窄带钢
1.
The rolling process of the hot rolled narrow strip is introduced, and some notice matters of the main equipment selection are pointed out; the production situation of the hot rolled narrow strip in our country is simply analyzed, mean while, the author has put forward some suggestions with the new workshop and the technology reformation.
介绍了热轧窄带钢的生产工艺,指出了轧线主要设备选型应注意的问题;简述了目前我国热轧窄带钢的生产状况,并对今后新建及技术改造热轧窄带钢车间提出了建议。
2.
This article put forward resolving measures for common quality problems aiming at hot rolled narrow strip used for welded pipe production course,such as rolling workpiece raise,width dimension exceeding the standard requirement,and strip wave-shape and sickle.
针对焊管用热轧窄带钢生产过程中一些常见的质量问题,如轧件翘头、宽度尺寸超标、带钢浪形和镰刀弯等,提出了解决问题的具体措施。
3.
Analysis of the width off-tolerance of hot rolled narrow strip and its resolution methods;
针对鄂钢 50 0mm 3 /4连续式热轧窄带钢生产情况 ,对其带钢宽度超差的原因进行了分析 ,并提出了相应的对策。
补充资料：上海十钢有限公司窄带钢蛇形振荡后立S形辊道运输
上海十钢有限公司窄带钢蛇形振荡后立S形辊道运输
上海十钢有限公司窄带钢蛇形振荡后立s形辊道运输
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条