1) high pressure grinding
辊磨
1.
The activation energy of magnetite materials of pellet which were pretreated with and without high pressure grinding is studied using Arrhennius Law in this paper.
利用阿伦尼乌斯公式分析了磁铁矿原料辊磨前后球团氧化反应的活化能。
2) Grinding roller
磨辊
1.
The high boron wear resistant cast steel was developed to produce grinding rollers and grinding collars of Raymond mill because of high manganese steel of lower work-hardening effect,poor abrasive-wear resistance and short service life used in the factory.
针对我厂长期使用的雷蒙磨高锰钢磨辊、磨环加工硬化效果差,使用寿命短,开发了高硼耐磨铸钢。
2.
To insure steady running of the equipment and to reduce the production cost, the plant carried out study on producing liner of grinding roller and base, mainly include: analyse and test physical and chemical performance of the liner material, choose suitable material, confirm the produce process,and et al.
Smidth公司生产的ATOX35型号立式磨机,为确保设备的正常运行和降低生产成本,该厂对磨辊和磨盘等部位的衬板易损件进行了国产化研究制造和应用探索。
3) roller
[英]['rəʊlə(r)] [美]['rolɚ]
磨辊
1.
Parallelism adjusting for grinding rolls of roller mill;
关于辊式磨粉机的磨辊调平
2.
Smidth Company designed ATOX vertical roller mill in the milldle of 20 century.
从立磨的工作原理可知,磨辊、磨盘及轴承的受力是否均衡和衬板的磨损是否均匀是改进其工作性能的重要方面。
4) Roll
[英][rəʊl] [美][rol]
磨辊
1.
For the rolls of a roller mill there are contradictions among their hardness, wear resistance and machining properties to which considerations are hard to be given comprehensively.
磨辊的硬度、耐磨性与切削加工性能,存在难以兼顾的矛盾。
2.
This paper analyses the structure and modeling conditions of the domestic roll grinding and fluting machines, offers suggestions on how to further improve the equipment, and provides a theoretical basis for future development.
对国内生产的磨辊磨光拉丝机的结构及造形进行了分析 ,并提出了进一步完善的建议 ,为今后该类设备的研制提供了理论依
5) Grinding roll
磨辊
1.
Analysis of grinding roll modification of Mitsubishi coal pulverizer type MVM25R;
三菱MVM25R型磨煤机磨辊改造分析
2.
The new material for medium speed grinding roll-MnMo compound high chromium cast iron has been developed successfully.
成功研制了中速磨磨辊新材料——锰钼复合高铬铸铁。
6) milling roller
磨辊
1.
Automatic control of open arc surfacing system for the milling roller;
磨辊明弧堆焊系统自动控制方法
2.
By scanning the milling roller-teeth surface coated with the uniform Ni-Cr alloy permeation layer through the high energy plasma arc at ordinary pressure, the multicomponent permeation and quenching harden were carried out.
运用高能等离子体弧束在常压下快速扫描均匀涂覆镍铬合金渗剂的磨辊辊齿表面,对辊齿进行多元共渗和自激冷淬火复合强化处理,并对辊齿表面硬化层组织结构和性能进行了研究。
补充资料:球辊磨
分子式:
CAS号:
性质:一种细磨机。许多重钢球夹在上下研磨圈之间。上圈固定,下圈绕垂直轴旋转,由于弹簧的压力,钢球亦被带着转动,欲碎物料加入到钢球的轨道沟内,被转动钢球压碎。碎制料被从研磨圈周边吹进的上升空气流带到装在粉碎圈上部的分级装置内进行分级。细粉在磨机外部收集起来作为成品,粗粉落回研磨圈内重新粉碎。球辊磨主要用于制备煤粉,也用于水泥工业。
CAS号:
性质:一种细磨机。许多重钢球夹在上下研磨圈之间。上圈固定,下圈绕垂直轴旋转,由于弹簧的压力,钢球亦被带着转动,欲碎物料加入到钢球的轨道沟内,被转动钢球压碎。碎制料被从研磨圈周边吹进的上升空气流带到装在粉碎圈上部的分级装置内进行分级。细粉在磨机外部收集起来作为成品,粗粉落回研磨圈内重新粉碎。球辊磨主要用于制备煤粉,也用于水泥工业。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条