1) glass ball spacer
玻璃微珠衬垫
1.
The present glass-spacers are classified as glass fiber spacer and glass ball spacer.
目前,液晶显示器所用的玻璃衬垫主要分为玻璃纤维衬垫和玻璃微珠衬垫。
2) glass spacer
玻璃衬垫
1.
The classification, composition, preparation and function of glass spacers are discussed in this paper.
玻璃衬垫主要用来控制液晶盒的厚度,对液晶显示器的对比度、响应时间和视角都有重要的影响。
3) glass bead
玻璃微珠
1.
Compressive properties and thermal stability of glass bead reinforced rigid polyurethane foams;
玻璃微珠增强硬质聚氨酯泡沫塑料的压缩性能及热稳定性
2.
Study on heat resistance of the modified bismaleimide composites filled with hollow glass beads;
空心玻璃微珠填充改性双马来酰胺树脂复合材料耐热性能的研究
3.
Effect of Surface Modification of Hollow Glass Bead on Property of Bismaleimide;
空心玻璃微珠表面改性对双马来酰亚胺树脂性能的影响
4) glass beads
玻璃微珠
1.
Analysis of glass beads retroreflective array film by ray tracing method;
玻璃微珠逆反射列阵膜的光路分析
2.
Composites of polyphenylene sulfide reinforced with two kinds of glass beads were prepared by compression molding.
2种不同粒径的空心玻璃微珠与聚苯硫醚树脂通过熔融共混挤出制得复合材料,研究了这2种玻璃微珠对聚苯硫醚树脂摩擦磨损性能的影响。
3.
Nickel ferrite coatings were prepared on the surface of glass beads using the polyacrylamide gel method.
采用高分子凝胶法在玻璃微珠表面制备了镍铁氧体包覆层。
5) glass microballoon
玻璃微珠
1.
Preparation and Property of Glass Microballoon/UHMWPE Composite;
玻璃微珠/UHM WPE复合料的制备及性能
2.
Study was made of synthesis of film forming material for glass microballoon emulsion coating and influence of various factors on polymer film performance is described.
研究了玻璃微珠乳胶涂料成膜物的合成，叙述了各种因素对聚合物涂膜性能的影响。
3.
On the basis of the test, the influence of glass microballoon on property of PTFE sealing materials has been studied.
通过分析测试,深入研究了玻璃微珠对PTFE 密封板材性能的影响。
6) glass microsphere
玻璃微珠
1.
Study on electric properties of glass microsphere/silver nanocomposite particles with core-shell structure;
玻璃微珠/银核壳纳米复合粒子电性能的研究
2.
Research and Produce of Rainbow System Based on Glass Microsphere;
基于玻璃微珠的霓虹斑斓系统研制
补充资料：玻璃微珠填充聚甲醛
分子式：
CAS号：
性质：以聚甲醛树脂为基料，玻璃微珠为填充剂的复合物。玻璃微珠的直径一般为10～25μm，填充量10％～30％。具有高刚性和低挠曲特性。弯曲强度和压缩强度较纯聚甲醛有所提高，尺寸稳定性有所改善。机械强度虽不及玻璃纤维增强聚甲醛，但各向异性小。由聚甲醛树脂与玻璃微珠均匀混合制得。主要用作具有高刚性要求的机械零部件。
CAS号：
性质：以聚甲醛树脂为基料，玻璃微珠为填充剂的复合物。玻璃微珠的直径一般为10～25μm，填充量10％～30％。具有高刚性和低挠曲特性。弯曲强度和压缩强度较纯聚甲醛有所提高，尺寸稳定性有所改善。机械强度虽不及玻璃纤维增强聚甲醛，但各向异性小。由聚甲醛树脂与玻璃微珠均匀混合制得。主要用作具有高刚性要求的机械零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条