1)  In-situ FTIR
原位FT-IR
2)  in situ
原位
1.
Research progress on enhancement of in situ remediation of heavy metal by electrokinitics;
重金属污染土壤的电动原位修复技术研究
2.
Investigation of mechanical properties and damping capacity of in situ TiB_2/7055 composites;
原位TiB_2/7055铝基复合材料的力学性能与阻尼性能
3.
Conductive polyaniline/chlorosulfonated polyethylene composites prepared by in situ emulsion polymerization and their properties;
原位乳液聚合制备导电性聚苯胺/氯磺化聚乙烯复合材料及其性能
3)  orthotopic
原位
1.
Urodynamical examination of orthotopic ileal neobladder with laparoscopic radical cystectomy;
腹腔镜下膀胱全切除、原位回肠新膀胱的尿流动力学分析
2.
The clinical management of cardiovascular complications after orthotopic liver transplantation;
原位肝移植术后心血管并发症的临床处理
3.
Establishment of multidrug resistance in a model of orthotopic transplantation of human hepatocellular carcinoma in nude mice and study on the mechanism of multidrug resistance;
裸鼠人肝癌原位移植多药耐药模型的建立及其耐药机制的探讨
4)  In-situ
原位
1.
Improving Tribological Properties of Metal Materials Based on in-situ Tribochemical Treatment Technique;
基于原位摩擦化学处理技术改善金属材料的摩擦学性能
2.
Biodiesel from Rapeseed via Extraction and in-situ Transesterification in Supercritical Methanol;
油菜籽与超临界甲醇原位萃取-酯交换反应制备生物柴油
3.
A novel strategy to fabricate in-situ surface reinforced metal composite;
原位制备表面增强复合材料的一种新方法
5)  in-situ reaction
原位反应
1.
Preparation of polyester/nano-ZnO composites by in-situ reaction;
原位反应合成聚酯/纳米氧化锌复合材料
2.
Fabrication of Al_2O_3-TiC/Al Composites by In-situ Reaction;
原位反应法制备Al_2O_3-TiC/Al复合材料
3.
In-situ reaction and phase composition design of monolithic refractories;
不定形耐火材料中的原位反应与相组成设计
6)  in situ polymerization
原位聚合
1.
Preparation of microcapsules for electrophoretic display via in situ polymerization of urea-formaldehyde;
一步原位聚合法制备电泳显示微胶囊的研究
2.
Unsaturated polyester resin(UP) /kaolinite intercalation nanocomposites were prepared by in situ polymerization through UP replacing DMSO in kaolinite/ DMSO intercalation usher,which was prepared by sonochemistry technique.
利用超声法制备了高岭土-DMSO插层复合物前驱体,采取二步取代,原位聚合制备了不饱和聚酯树脂/高岭土纳米复合材料,并用XRD、FT-IR等手段对材料结构进行了表征,研究了纳米复合材料的阻燃性能。
3.
Polyamide 6(PA6)/silica nanocomposite was prepared by using tetraethoxysilane(TEOS) as precursor and 3-glycidoxypropyltrimethoxysilane(WD-60) as modifier through in situ polymerization.
以正硅酸乙酯(TEO S)为前驱体,环氧丙基三乙氧基硅烷(W D-60)为改性剂,经原位聚合制备PA 6/S iO2纳米复合材料。
参考词条
补充资料：FT-IR
分子式：
分子量：
CAS号：

性质：FT-IR 傅里叶变换技术应用到红外光谱，能使这种光谱方法的灵敏度得到提高。光谱仪由迈克尔逊干涉仪和数据处理系统等组合而成。光源发出的红外辐射，通过迈克尔逊干涉仪变成相干光，通过样品后即得到带有样品信息的干涉图，放大后并经计算机作出此干涉图函数的反傅里叶余弦变换，就得到光谱图。与色散型红外分光光度计相比，傅里叶变换红外光谱具有灵敏度高、分辨率高、波数精度高、扫描时间快、光谱范围宽等优点。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。