1) high temperature homogenizing annealing
高温均匀化退火
2) homogenization
[,həʊmədʒənaɪ'zeɪʃən]
均匀化退火
1.
Influence of homogenization on flow stress of Al-1Mn-1Mg alloy during hot compression deformation;
均匀化退火对Al-1Mn-1Mg合金高温压缩流变应力的影响
2.
Influence of homogenization on morphologies of the precipitated phases in Al-1Mn-1Mg alloy;
均匀化退火对Al-1Mn-1Mg合金中析出相形态的影响
3.
Influence of melt-treatment and homogenization on microstructure and mechanical properties has been studied systematically and deeply with the aids of some modern .
借助光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、能谱仪(EDAX)、X射线衍射(X-Ray)、电子拉伸机等先进的分析测试手段,系统深入地研究熔体处理与均匀化退火工艺对易拉罐用铝材微观组织与力学性能的影响规律,在此基础上采用动态热/力模拟试验技术,全面深入地探讨了易拉罐用铝材的熔体处理、热处理工艺、热塑性变形行为三者之间的相互关系,深化了对铝熔体处理的基本理论、冶金缺陷的作用机理以及铝材高温塑性变形理论的认识,对进一步挖掘易拉罐用铝材的性能潜力具有重要意义,可为实际热轧工艺的确定和优化提供试验依据与理论指导。
3) homogenizing annealing
均匀化退火
1.
Effect of homogenizing annealing on microstructure and mechanical properties of AZ91D magnesium alloy;
均匀化退火对AZ91D镁合金组织与性能的影响
2.
Effects of homogenizing annealing on microstructure and properties of hypereutectic Al-17Si alloy
均匀化退火对过共晶Al-17Si合金组织和性能的影响
3.
Effect of various homogenizing annealing process on the microstructure and mechanical properties of high strength and heat resistance Al-Cu-Mg-(Ag)-Mn-Zr alloy were investigated by differential thermal analysis,metallurgical structure observation,thermal simulation and tensile test.
通过差热分析(DTA)、金相组织观察、热模拟及拉伸试验等手段,分析了不同均匀化退火工艺对含Ag的Al-Cu-Mg-(Ag)-Mn-Zr新型耐热铝合金的微观组织和力学性能的影响。
4) Homogeneous Annealing
均匀化退火
1.
The homogeneous annealing proceeded.
研究了NdFeB合金的铸锭组织,并对NdFeB合金进行了均匀化退火。
5) homogenization annealing
均匀化退火
1.
Effect of homogenization annealing process on heat deformation behavior of ZM21 magnesium alloy
均匀化退火工艺对ZM21镁合金热变形行为的影响
2.
Effect of homogenization annealing process on textures and earing rate of 1100 aluminium sheet was investigated using orientation distribution functions(ODF).
用晶体取向分布函数研究和分析了均匀化退火对1100铝带材织构的影响;比较了(560~580)℃×16 h、(520~550)℃×9 h两种均匀化退火工艺下得到的铝带材的织构组成。
3.
Optimization for chemical composition standard,homogenization annealing,extrusion process,holding time and aging of 6082 aluminum alloy extruded profile are introduced in the paper.
介绍了6082铝合金挤压型材的化学成分内控标准、均匀化退火、挤压工艺、停放时间、时效等方案的优选,合理设计了生产工艺制度,使产品达到6082铝合金型材的质量要求,满足FAST结构项目的需要。
6) homogenizing
[英][həu'mɔdʒənaiz] [美][ho'mɑdʒə,naɪz]
均匀化退火
1.
Effect of homogenizing on microstructure and mechanical properties of 32Cr2Mo2NiVNb steel;
均匀化退火对32Cr2Mo2NiVNb钢组织和性能的影响
2.
In order to improve the forming property of twin roll casting magnesium alloy sheets AZ31B, homogenizing treatment was carried out at different annealing temperature (300,350,400℃) and the holding time (1,2,3 h).
为提高双辊铸轧AZ31B镁合金薄板的成形性能,在不同退火温度(300、350、400℃)和保温时间(1、2、3h)下对铸轧AZ31B镁合金薄板进行均匀化退火试验。
3.
However,few research have been done on the effect of homogenizing treatment on the precipitation of Er modified 5083 alloy.
3Er(5083)合金均匀化退火过程中析出的Al_3Er相的显微组织进行了透射电镜观察。
补充资料：软化退火(见低温退火)
软化退火(见低温退火)
soft-annealing
rU0nhUO tUihUO软化退火(soft一annealing)见低温退火。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条