1) unsaturated polyester resin mold
不饱和树脂基模具
1.
Research on unsaturated polyester resin mold for ceramics;
陶瓷成型用不饱和树脂基模具的研究
2) unsaturated resin
不饱和树脂
1.
Synthesis of a new type antistatic electricity unsaturated resin;
一种新的抗静电不饱和树脂的合成
2.
Different amount of active micro silicon powder is added to the system of unsaturated resin,and different mechanics properties curing substance can be got.
向不饱和树脂体系中添加不同质量的活性硅微粉,用以改善固化物的力学性能。
3.
The performances of unsaturated resin filled with nano-CaCO 3 were studied.
报道了纳米级碳酸钙填充不饱和树脂的性能研究。
3) unsaturated polyester resin
不饱和树脂
1.
This paper introduced the preparation of a new corrosion resistant unsaturated polyester resin from PET waste.
介绍了用PET废料制备新型耐腐蚀不饱和树脂工艺 ,确定了配料及反应温度。
2.
As a conductive fillers, graphite nanosheets can be induced by the AC electric field in unsaturated polyester resin and then prepared oriented unsaturated polyester resin/graphite nanosheets composite.
以纳米石墨微片作为导电填料,将它分散于不饱和树脂中,在交流电场作用下取向制备不饱和树脂/纳米石墨微片复合导电材料。
3.
Flame retardance and flame retardance mechanisms of magnesium oxychloride cement in the unsaturated polyester resin (UP) were studied by limited oxygen index (LOI)measurement,thermogravimetry analysis(TGA) and NBS techniques.
采用极限氧指数法、热重分析和烟密度测试法研究了氯氧镁水泥在不饱和树脂(UP)中的阻燃作用和阻燃机理。
4) hydroxyl terminated UP resin
端羟基不饱和聚酯树脂
1.
We had studied the formula and synthesis method o f an hydroxyl terminated UP resin with low viscosity.
对低粘度端羟基不饱和聚酯树脂的配方与合成工艺进行了研究。
6) unsaturated polyester resin
不饱和聚酯树脂
1.
Studies on flexible unsaturated polyester resin from polyether glycol and its flexible curing system;
聚醚二元醇不饱和聚酯树脂及其柔性固化体系
2.
Modified unsaturated polyester resin by N-phenyl maleimide;
N-苯马来酰亚胺改性不饱和聚酯树脂
3.
Advances in modification of unsaturated polyester resin;
不饱和聚酯树脂改性研究进展
补充资料：酚醛环氧乙烯基酯不饱和聚酯树脂
分子式：
CAS号：
性质：含有酚醛环氧甲基丙烯酸酯结构的不饱和聚酯树脂。较双酚A二缩水甘油醚(即双酚A环氧)型乙烯基酯聚酯交联密度大、热变形温度高、耐热性好，但可挠性和耐碱性稍差。多数性能基本相似。铸塑料热变形温度129℃。增强塑料的拉伸强度29.42MPa，拉伸模量17.16GPa，弯曲强度31.36MPa，弯曲模量14.7GPa，冲击强度86kJ/m2；体积电阻率5.41×1013Ω·cm，介电强度25.9MV/m。由苯酚、甲醛制成线型酚醛树脂后，再与甲基丙烯酸反应制得。可制作玻璃纤维增强塑料和铸塑料等用于耐高温、耐腐蚀和耐溶剂等方面的设备和零部件。
CAS号：
性质：含有酚醛环氧甲基丙烯酸酯结构的不饱和聚酯树脂。较双酚A二缩水甘油醚(即双酚A环氧)型乙烯基酯聚酯交联密度大、热变形温度高、耐热性好，但可挠性和耐碱性稍差。多数性能基本相似。铸塑料热变形温度129℃。增强塑料的拉伸强度29.42MPa，拉伸模量17.16GPa，弯曲强度31.36MPa，弯曲模量14.7GPa，冲击强度86kJ/m2；体积电阻率5.41×1013Ω·cm，介电强度25.9MV/m。由苯酚、甲醛制成线型酚醛树脂后，再与甲基丙烯酸反应制得。可制作玻璃纤维增强塑料和铸塑料等用于耐高温、耐腐蚀和耐溶剂等方面的设备和零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条