1) Tie rod
拉杆
1.
The Analysis and Solution of Process Plan for the Batch Production of Tie Rod;
拉杆批量生产工艺方案的分析与确定
2) tension rod
拉杆
1.
A calculation method of action effect increment of prestressed horizontal tension rod;
预应力水平拉杆作用效应增量的计算
2.
The cause analysis on the tension rod rupture of the coal pulverizer and welding repair
磨煤机拉杆断裂原因分析及焊接修复
3.
The structural performance of beam string structures changes greatly,when cables are replaced by prestressed tension rods.
在张弦梁中用预应力拉杆代替拉索,其结构性能发生变化;通过分析比较得出预应力拉杆式张弦梁的性能特点和设计中应当注意的事项。
3) pull-rod
拉杆
1.
Hot extrusion technology and die design of aluminum alloy pull-rod;
铝合金拉杆的热挤压工艺及模具设计
2.
If using American standard "ASME Boiler and Pressure Vessel Norm"to design and calculat, a flat-panel will be designed as a flat-panel with pull-rod, so that the calculated plate thickness is quite smaller and save materials.
如果采用美国标准《ASME锅炉及压力容器规范》设计计算,将平板设计成带有拉杆的平板,计算出的平板厚度更小,更节省材料,传热速度更快,热效率更高。
3.
The hot extruding forming technology and die design of high-voltage switch component LW8-35SF6 aluminum alloy pull-rod are analyzed.
分析了高压开关零件LW8-35SF6铝合金拉杆的热挤压成形工艺及模具设计。
4) tie bar
拉杆
1.
A new method of the design for tie bar and falsework during the construction of the thin-wall of bridges;
薄壁墙施工中拉杆与脚手架设计的新方法
2.
Study on the Dowel and Tie Bar in Jointed Plain Concrete Pavement;
普通水泥路面传力杆及拉杆研究
3.
In order to overcome the problem of early failure of the tie bar in the plastics injection molding machine, an integrated finite element analytic model was formulated dealing with the tie bars,fixed platen, movable platen, and rear platen.
针对注塑机拉杆的早期断裂问题,为使拉杆应力分布合理化,以拉杆与定模板、动模板和调模板等组成的整体有限元分析模型为基础,用优化方法研究拉杆卸载槽的合理位置以及各模板基本厚度的确定,以及拉杆卸载槽的位置和各模板基本厚度对拉杆应力分布的影响。
5) pull rod
拉杆
1.
After some analyses of load transfer behavior of anchor rod,and based on the results of field test,a type of technique of removable anchor for which the pull rod can be removed,is proposed.
通过对锚杆荷载传递特性的分析和在现场原型试验研究的基础上,提出了一种仅拆除拉杆材料的可拆型锚杆技术。
2.
Several improvements have been made after analyzing the causes of frequent fracture for pull rod in roughing mill stand at Steel Bar Plant with 3D modeling software Pro/E and finite element analysis software ANSYS .
采用三维建模软件Pro/E和有限元分析软件ansys,对棒材厂粗轧机架拉杆频繁断裂的原因进行分析,并做了有效的改进。
6) tie-bar
拉杆
1.
Finite element analysis of tie-bars and platens of a plastic injection machine;
注塑机拉杆与模板的有限元分析
2.
Stress analysis & parameters optimization of slot for releasing stress of a tie-bar of an injection machine;
注塑机拉杆卸载槽的应力分析与优化
3.
On the basis of briefly analyzing the mechanical model of toggle clamping mechanism,taking the minimum sum of both tie-bar and toggle s weight as the target function,taking stiffness condition as the constraint condition,the paper calculates the tie-bar diameter with optimal design.
在简要分析肘杆式合模机构的力学模型的基础上,以拉杆、肘杆质量之和最小作为目标函数,将刚度作为约束条件,用优化设计的方法对拉杆直径的计算进行了研究。
补充资料：拉杆
（～儿）①安装在机械或建筑物上起牵引作用的杆形构件，如自行车闸上的长铁棍。②由不同直径的管状物套接而成的杆，能拉长或缩短：～支架ㄧ～天线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条