1) master-slave control
主从控制
1.
Taking an air conditioning system with two identical chillers in parallel as an example, analyses the performance of the chillers under part load conditions, and points out that the cooling output of the system shall be only equally shared by the two chillers if the outlet temperature of chilled water is not reset, and that a master-slave control mode can not be adopted.
以两台相同冷量冷水机组并联运行的空调系统为例分析了部分负荷工况下机组的性能,指出如果不对机组的冷水出水温度进行重设,系统冷量只能是平均分配,而无法实现主从控制。
2.
A master-slave control surgical robot system was developed for minimally invasive laryngeal surgery in this dissertation.
本文所研究与开发的主从控制喉部手术机器人主要面向喉部微创外科手术。
3.
In the viewpoint of remote welding noncontact application, concise and flexible master-slave control strategy was applied.
本文详细分析了遥控机器人系统常用控制模式的特点,针对遥控焊接的非接触特点,采用简便、灵活的主从控制策略。
2) master slave control
主从控制
1.
The master slave controlled inverter parallel system is composed of three inverter modules.
基于主从控制的逆变器并联系统由 3个采用输出电压瞬时值和滤波电感电流瞬时值双闭环反馈控制的逆变器模块构成 ,通过共用电压调节器实现负载均分 。
2.
Under the specific condition that the exterior mechanism can not be improved, through analysis, the original master slave control mode is replaced by single-to-single control mode, so that the problem of frequent trip of driving motor is solved successfully, and the machine accidents like gear beating are eliminated, making the equipment operating smoothly.
在外部机械结构难以改善的特殊条件下,通过深入分析,最终将驱动电机的控制方式由原来的主从控制方式改为单对单控制方式,成功解决了驱动电机频繁跳闸的问题,消除了驱动齿轮打齿等重大机械事故,使设备运转良好。
3) master/slave control
主从控制
1.
Configuration and master/slave control principle of ultra precision wafer stage were introduced.
介绍了超精密硅片台系统配置及其主从控制原理,结合粗动台和微动台两者的优点,可以实现运动控制的大行程和高精度。
2.
For this,in the paper,for the periodic motion characteristic of the dual linear motor,on the base of considering the tracking performance and the stability,the master/slave control and the repetitive control are adopted to compensate for the periodic error,so that dual linear motor can keep exactly synchronous motion.
为此,文章针对双直线电动机的周期运动特性,在考虑跟踪性能和稳定性的基础上,采用主从控制和重复控制相结合的策略保证两电动机同步运动并且补偿了周期性误差。
4) principal/subordinate control
主/从控制
5) principal-subordinate control
主-从控制
1.
The performance of combining principal-subordinate control with PTP Control is realized.
结合为完成放射性物质装配任务的ＳＣＡＲＡ装配机器人的设计实例，介绍了该机器人工作原理、控制过程、多个末端执行器自动换接技术，并实现以主－从控制和ＰＴＰ控制两种方式完成作业。
6) master-slave control
主从式控制
1.
An automatic tape-laying system with the master-slave control is designed based on the inhered winding machine for the large composite cylinder production.
针对某型号工程大型复合材料筒段成型需求,以通用缠绕机为平台,提出一种基于主从式控制系统的专用自动铺带机系统方案。
2.
This paper proposes a new battery management system(BMS)based on a master-slave control mode for multi-cell li-ion battery packs.
为多节锂离子电池包提出了一种新型的基于主从式控制的管理系统。
补充资料：主从
1.主人与仆从。 2.主要的和从属的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条