说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 身管
1)  barrel [英]['bærəl]  [美]['bærəl]
身管
1.
Prediction Analysis on Residual Life of Tank Gun Barrel Based on BP Neural Network
基于BP神经网络的坦克炮身管剩余寿命的预测分析
2.
The barrel liquid-cooling technology is widely used in ground-based air-defense and anti-missile small-caliber automatic gun and ship-borne medium or small caliber guns.
身管液冷技术在陆基防空反导小口径自动炮和舰载中、小口径火炮中被广泛采用,研究身管液冷状态下的温度分布对于火炮发射安全性和武器效能具有重要意义。
2)  gun barrel
身管
1.
The paper brings out the complex technology which is after laser discrete hardened pretreatment on basal body, chromate treatment can improve the service life of chromium plated gun barrel.
提出了先激光离散淬火预处理基体后,再镀铬提高镀铬身管寿命的复合工艺。
2.
Scientificalness,applicability and operationability are the basic requirements of quality evalu-ation for gun barrel.
火炮身管质量评估方法应具有科学性、适用性和可操作性的基本要求,目前使用的各种火炮身管质量状况评估方法均存在缺陷。
3.
Calculation of heat flux into the gun bore is very important for wear problems in the gun barrel and its thermo-mechanical properties.
确定发射时输入内膛壁的热流密度对研究烧蚀磨损以及身管的热力学特性等问题至关重要。
3)  gun tube
身管
1.
Cirterion of gun tube s failure,caused by inner bulge due to impaction by fragments of high eaplosive projectile,is researched.
研究了杀爆战斗部破片冲击身管引起管内鼓包导致身管失效的准则。
2.
In this paper,the performance of star section gun tube is studied in theory.
从理论上分析研究了星形截面身管的性能,在不削弱现有身管强度的条件下,分别用增加相同质量的方法、增加相同刚度的方法、增加相同散热面积的方法和增加相同传热热阻的方法,建立了传统火炮身管与星形截面身管性能的数学模型。
3.
This article is about a systematic research on the problem to use laser for hardening treatment of gun tube bore surface, including significant process, and it provides test data for laser treatment of gun tube meterial.
研究了激光用于火炮身管的内表面硬化处理问题 ,对实施工艺作了有意义的探讨 ,而且提供了对身管材料激光处理的实验数据 ,为激光热处理技术用于火炮提高身管的使用寿命进行了有益的工作 。
4)  tube [英][tju:b]  [美][tub]
身管
1.
In the ammunition and gun rests,the change of interior dimension of the tube will affect the test results.
内弹道性能试验结果随身管内膛尺寸的变化而变化。
2.
Through buillding the three-dimensional model of tube,dividing the action area of powder gases pressure,tube have been analyzed with finite element method of ABAQUS,on the vibration of tube due to powder gases pressure under gravity have been obtained.
研究了由于火药燃气压力在身管中激发的振动问题。
5)  gun tube
火炮身管
1.
The experiments of vibration reaming small caliber gun tube with cemented carbide reamer are carried out.
论文研究了振动铰削降低表面粗糙度的机理,在此基础上通过硬质合金铰刀振动铰削小口径火炮身管的实验,深入分析了振动铰削对火炮身管内膛表面粗糙度的影响。
2.
The vibration reaming experiments of a small caliber gun tube were carried out by the auto aligning reamer.
研究了振动铰削抑制积屑瘤形成的机理,在此基础上通过浮动铰刀振动铰削小口径火炮身管的实验,分析了振动铰削对火炮身管内膛表面粗糙度的影响。
3.
Total transfer matrix and vibration frequency equation of gun tube were deduced.
利用二节点Hemite梁单元对火炮身管进行单元离散,利用传递矩阵进行离散单元之间状态矢量的传递,推导出火炮身管总传递矩阵及振动频率方程。
6)  identity management
身份管理
1.
Enterprise Identity Management Model Creation and Implementation;
企业身份管理模型构建与实施
2.
Thoughts on Identity Management Strategies in Internet
互联网中身份管理应对策略思考
补充资料:不坚身贸易坚身
【不坚身贸易坚身】
  谓父母所生之身,乃四大假合而成,危脆不实,体非坚固,生灭无常,不可久存;若能持守五戒,清净无染,修习菩提无上之道,以证金刚不坏之身,是为以不坚身贸易坚身也。(四大者,地大、水大、火大、风大也。五戒者,不杀、不盗、不邪淫、不妄语、不饮酒也。)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条