1) atomizing medium
雾化介质
1.
Effect of atomizing medium on micrograph and size distribution of free-lead solder powder;
雾化介质对无铅焊锡粉末形貌及粒度分布的影响
2.
By utilizing supersonic atomization that is designed by ourselves, the study studies the influences of atomizing medium on the properties of free-lead solder powders of SnAgCu system:efficient atomization efficiency, size distribution and degree of sphericity.
实验利用自行设计的超音速雾化制粉装置,研究了不同雾化介质对SnAgCu系无铅焊锡粉末有效雾化率、粒度分布及球形度的影响。
2) atomization medium
雾化介质
1.
using refinery dry gas to replace steam as the feedstock atomization medium in RFCC unit.
考虑到催化裂化装置普遍存在的蒸汽用于原料雾化所存在的弊端,结合中国石化股份有限公司荆门分公司催化裂解(DCC)装置的实际情况,提出一种新的原料油雾化技术,即采用炼厂干气代替现有的催化裂化雾化介质——蒸汽,以期克服蒸汽雾化所存在的问题。
2.
However, there has been nearly no report on changing the atomization medium.
二流雾化法起源于至今的80多年来,众多学者在二流雾化法上进行了大量的研究工作,发展了多种二流雾化法工艺,但在改变雾化介质结构方面的研究工作极少有报道。
3) spraying DBD
雾化介质阻挡放电
4) atomization quality
雾化质量
1.
By comparing with different flow characteristics of fluid in nozzle,some parameters such as extended length of nozzle,entrance velocity of fluid and the inlet pipe radius are studied to analyze the influence to the atomization quality.
比较了不同喷嘴结构形式下流体的流动特征,研究喷嘴突出长度、入口速度以及输入管内径对喷嘴雾化质量的影响。
2.
The combined-charging hydraulic electrostatic spraying box was designed,the basic designing theories,structure and working process of this box were theoretically discussed,the atomization quality of this box was studied by carrying out performance experiment.
在常用手动喷雾器基础上,采用组合充电式静电喷雾装置,并对其工作原理和关键结构进行了理论探讨,进行了常规喷雾与静电喷雾的雾化质量对比试验,结果表明,所设计装置能够达到静电喷雾的效果,静电喷雾的雾滴谱较窄,雾滴粒径细小,均匀度较高,组合充电方式和液力式雾化原理的结合较好地实现了静电喷雾。
3.
In the meanwhile,it can increase the efficiency of analysis,optimize the atomization quality of nozzle,therefore,much developing effect will be obtained in the e.
编制出喷雾器喷嘴流场的APDL计算程序,适应于各种条件和工况的数值模拟分析,大大提高分析效率,优化喷嘴雾化质量,取得了良好的开发效果。
5) atomized quality
雾化质量
1.
Through analysis of the adjusting methods of location of flame point, quantity of blast, quantity of attacting wind,wind quantity and fuel oil ratio and atomized quality,the best burning result is obtained.
介绍了玛连尼MAP系列沥青拌和楼燃烧系统火焰好坏的判断依据及成因,针对着火点位置、鼓风量、引风量、风油比、雾化质量5个方面的调整方法进行分析,最终达到良好的燃烧效果。
补充资料：Fogeffect(雾化效果)
fog effect (雾化效果)
雾化效果是3d的比较常见的特性，在游戏中见到的烟雾、爆炸火焰以及白云等效果都是雾化的结果。它的功能就是制造一块指定的区域笼罩在一股烟雾弥漫之中的效果，这样可以保证远景的真实性，而且也减小了3d图形的渲染工作量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条