1) concentrated emulsion
浓乳剂
1.
The conception,basic principle,character properties and development of pesticide concentrated emulsion were reviewed and discussed.
从浓乳剂的概念、原理、性能特点以及研究开发现状等方面进行了综述,并展望了我国浓乳剂的发展前景。
2) EW
水乳剂（浓乳剂）
3) concentrated emulsion
超浓乳液
1.
Formation, nature and application of concentrated emulsion;
超浓乳液的形成、性质及应用
2.
Stable concentrated emulsion of MMA/BMA/St was prepared by using sodium dodecyl sulfate(SDS) and hexadecamol(HD) as the compound emulsifier, with Azobisisobutyronitrile(AIBN) as initiator, the concentrated emulsion was polymerized at 40 ℃～45 ℃ which the volume fraction of the dispersed phase can be over 85%.
以十二烷基硫酸钠(SDS)和十六醇(HD)为复合乳化体系,偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)/甲基丙烯酸丁酯(BMA)/苯乙烯(St)为混合单体,在40℃~45℃引发聚合,制备了分散相占85%以上的稳定超浓乳液。
3.
In this paper,the definition and preparation of concentrated emulsion wereintroduced.
本文主要介绍了超浓乳液的定义和制备方法。
4) concentrated emulsion
浓乳液
1.
Preparation of poly (butyl acrylate) porous elastomer via inverse concentrated emulsion;
反相浓乳液方法制备多孔聚丙烯酸丁酯弹性体材料
2.
Ethanol-permselective pervaporation separation membrane prepared via concentrated emulsion polymerization;
浓乳液聚合制备优先脱醇渗透蒸发分离膜
3.
A novel method, concentrated emulsion biphasic polymerization, was used to prepare the poly (butyl acrylate) particles.
用浓乳液双相法合成PBA ,通过在合成过程中添加不同用量的DVB交联剂和MMA硬单体调节PBA粒子的硬度及性能 ,研究了不同DVB及MMA加入量的PBA对PVC力学性能的影响。
5) concentrated emulsion polymerization
浓乳液聚合
1.
Porous TiO2 monolithic ceramic was prepared via sol-gel method using polymer foam as template,which was polymerized through concentrated emulsion polymerization.
采用浓乳液聚合方法制备出多孔聚合物结构材料作为模板,通过溶胶-凝胶法,将异丙醇钛的异丙醇溶液多次浸泡聚合物泡孔材料制备出了尺寸为毫米级的多孔氧化钛陶瓷材料。
2.
The polymer foam polymerized via concentrated emulsion polymerization was immerged in a solution of titanium (IV) isopropoxide in 2-propanol, which underwent a sol-gel process.
采用浓乳液聚合方法制备了聚苯乙烯和聚丙烯酰胺聚合物泡孔材料，用此泡孔材料作为制备多孔陶瓷材料的模板，通过溶胶—凝胶工艺，制备出了孔结构可以有效调节的多孔陶瓷材料。
3.
Rigid and flexible polymer particles were successfully produced by concentrated emulsion polymerization.
采用浓乳液聚合方法分别制备了刚性和弹性的聚合物异形粒子,讨论了制备过程中分散相体积分数、交联剂的用量、连续相中硅胶含量等参数对聚合物异形粒子形态的影响,并对异形粒子的形态及其应用进行了表征。
6) Dense emulsion dilution method
浓乳稀释法
参考词条
补充资料：浓乳剂
分子式：
CAS号：
性质：又称乳状液。农药剂型的一种。一种或多种难溶于水的液体药剂或溶于适当有机溶剂的固体药剂，与少许的水和乳化剂（如肥皂、土耳其红油等）混合，经机械搅拌面民膏状或浓的乳浊液。浓度比乳剂高，一般与乳油相近。使用时加水稀释。
CAS号：
性质：又称乳状液。农药剂型的一种。一种或多种难溶于水的液体药剂或溶于适当有机溶剂的固体药剂，与少许的水和乳化剂（如肥皂、土耳其红油等）混合，经机械搅拌面民膏状或浓的乳浊液。浓度比乳剂高，一般与乳油相近。使用时加水稀释。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。