1) Magna 777 electrode
Magna 777焊条
1.
The cracks of fan shell were repaired successfully by using are warm welding and Magna 777 electrode.
通过对风机壳体的焊接性能及风机运行环境的分析,制定出合理的焊接工艺,采用电弧半热焊工艺及选用Magna 777焊条,成功地完成了风机壳体裂纹的焊接修复。
2) welding rod
焊条
1.
Improvement method of testing welding rod surface parting shape dimensions using lock phase amplifier;
锁相放大器测试焊条表面分形维数的改进
2.
The influence of melt slag basicity to welding rod coating alloying element transition coefficient;
熔渣碱度对焊条药皮中合金元素过渡系数的影响
3) covered electrode
焊条
1.
Evaluation of typical metal transfer modes for covered electrode;
焊条典型熔滴过渡形态的判读
2.
and the tendency for hydrogen - induced cracking of the T91/ 12Cr1MoV joint welded with different covered electrodes was investigated by means of electrolytic hydrogen charging and constant - load delayed cracking test.
用甘油法测定了从日本进口的ＣＭ－９Ｃｂ焊条、国内新研制的Ｔ９１专用焊条以及Ｒ３１７焊条熔敷金属中的扩散氢含量。
4) Electrode
[英][ɪ'lektrəʊd] [美][ɪ'lɛktrod]
焊条
1.
Application of Complex Ferroalloy in Coating of Electrodes;
复合铁合金在焊条药皮中的应用
2.
Special electrode with high temperature corrosive resistance;
抗高温氧化腐蚀专用焊条
3.
The study of electrode for line pan of scraper conveyer;
刮板输送机中部槽耐磨焊条研究
5) welding electrode
焊条
1.
According to a new type of frog made of granular bainitic steel,the paper researches a special welding electrode for repairing and joining.
针对新型辙叉用贝氏体钢,研制出一种焊接工艺性能良好、焊缝组织为粒状贝氏体的、用于焊接修补和连接的专用焊条。
2.
CHE607GX is a kind of welding electrode with high toughness and low sulphur fox X70 pipeline steel in China .
研制了X70管线钢配套用低硫高韧性焊条。
6) manual electrodes
焊条
1.
On the basis of study on the weldability of 40Cr steel and 55Si2Mn steel,welding process test was contrasted among different manual electrodes and different combined of manual electrodes.
在对40Cr/55Si2Mn钢焊接性分析的基础上,进行了多种焊条和焊条组合的焊接工艺对比试验,并对焊缝和接头进行了相应的性能测试和显微组织观察。
2.
According to requirements of large size gear of mine and cement machinery for surfacing wear resistant performance,research was concentrated on surfacing manual electrodes possessingimpact resistance and mid-metals contact fatigue wear resistance.
根据矿山机械、水泥机械等大型齿轮磨损堆焊性能的要求，有针对性的研制出了具有耐冲击、金属间接触疲劳磨损的堆焊焊条。
补充资料：M777
m777是最新的野战火炮系统，其主体结构广泛采用钛金属以减轻系统重量，其重量比现役m198式榴弹炮约轻4536千克。m777利用钛金属材料作为主结构材料有效的改善了火炮
的可运输性以及机动性。它可适用所有的155毫米口径弹药，包括精确制导弹药。m777轻型榴弹炮重量与m119式105毫米相差无几，而火力完全可与155毫米m198相媲美。一架c-130运输机一次可运送两门m777榴弹炮。陆军装备的这18门m777榴弹炮将加装数字火控系统，定型为m777a1，该火控系统集通信、导航和瞄准于一身，很大程度上可提高火炮的精确打击和快速反应能力.
美国陆军接收了首批共18门m777式155毫米轻型榴弹炮，并交付给驻夏威夷的美陆军第11野战炮兵团第2营使用，以换装以前装备的m119式105毫米榴弹炮。该炮兵团隶属于美陆军斯特瑞克第5战斗旅。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条