1) line contact rolling fatigue
线接触滚动疲劳
1.
The line contact rolling fatigue properties of Cr5 steels for backup roll under two kinds of heat treatment(940 ℃) quenching and 450 ℃,535 ℃ tempering were studied and the P-σ-N curves were also measured.
研究了940℃淬火450℃、535℃回火,两种热处理工艺下Cr5型支承辊用钢的线接触滚动疲劳性能,测定了其P-σ-N曲线。
2) rolling contact fatigue
滚动接触疲劳
1.
Effects of surface defects on rolling contact fatigue in 10Cr4Ni4Mo4V;
预制表面缺陷对钢滚动接触疲劳性能的影响
2.
Rolling Contact Fatigue Life of Silicon Nitride Ceramic Balls;
氮化硅陶瓷球的滚动接触疲劳寿命研究
3.
Influence of rolling contact fatigue loads on stress intensity coefficients of rail surface contact fatigue crack
滚动接触疲劳载荷对铁轨表面接触疲劳裂纹应力强度系数的影响
3) rolling contact fatigue method
滚动接触疲劳法
1.
The adhesion property of Au/NiCr/Ta multi-layered metallic films was investigated by the indentation method,rolling contact fatigue method and scratch method with both friction and acoustic emission modes.
针对Al2O3基体上磁控溅射沉积的Au/NiCr/Ta多层金属薄膜,用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法,对比研究了金属薄膜与基体的结合性能。
4) rolling contact fatigue life
滚动接触疲劳寿命
1.
Effect of diamond-like carbon films on the bearing steel surface mechanical properties and rolling contact fatigue life
类金刚石薄膜对轴承钢表面机械性能和滚动接触疲劳寿命的影响
2.
To prolong the fatigue life, most of all, to extend the rolling contact fatigue life(FCF) of rolling bearing, is a very important research project for bearing staff at all times.
测试结果显示,合成薄膜后轴承试样的滚动接触疲劳寿命得到了很大改善;不同参数下的Weibull分布曲线表明,处理后试样的疲劳寿命分散性明显减少。
5) rolling contact fatigue strength
滚动接触疲劳强度
6) contact fatigue
接触疲劳
1.
Effect of ceramic additive in lubricating oil on contact fatigue and wear performance of steel/steel friction pair;
陶瓷润滑油添加剂对钢-钢接触疲劳及磨损性能的影响
2.
Study on the contact fatigue resistance of Cr12V and Cr12MoV steels;
Cr12V与Cr12MoV钢的接触疲劳性能研究
3.
Factors to affect the contact fatigue performance;
影响接触疲劳性能的因素
补充资料：混合式钢丝绳(见线接触钢丝绳)
混合式钢丝绳(见线接触钢丝绳)
alternate type steel wire rope
hunheshl gangslsheng混合式钢丝绳(alternate type Steez wireroPe)见线接触钢丝绳、
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条