1) Contact Fatigue Life
接触疲劳寿命
1.
Metallurgical Quality and Contact Fatigue Life of Bearing Steel Produced by Continuous Casting and Ingot Casting;
连铸和模铸轴承钢的冶金质量及接触疲劳寿命
2.
The steel by deep nitriding possessed excellent microhardness gradient and favorable distribution of residual compressive stresses,and the contact fatigue life of nitrided steel under the given load showed a great improvement in relation to carburized 18CrNi4A steel.
深氮化试件具有优良的硬度梯度和残余压应力分布,与渗碳件相比接触疲劳寿命提高3。
3.
The end queching curve,the grain size of austenite and the contact fatigue life of different steels used for cold roll were measured.
测定了不同冷轧辊用钢的端淬曲线、奥氏体晶粒度和接触疲劳寿命,结果表明:新型冷轧辊用钢的淬透深度达35~40 mm,且具有低的过热敏感性和高的接触疲劳寿命。
2) rolling contact fatigue life
滚动接触疲劳寿命
1.
Effect of diamond-like carbon films on the bearing steel surface mechanical properties and rolling contact fatigue life
类金刚石薄膜对轴承钢表面机械性能和滚动接触疲劳寿命的影响
2.
To prolong the fatigue life, most of all, to extend the rolling contact fatigue life(FCF) of rolling bearing, is a very important research project for bearing staff at all times.
测试结果显示,合成薄膜后轴承试样的滚动接触疲劳寿命得到了很大改善;不同参数下的Weibull分布曲线表明,处理后试样的疲劳寿命分散性明显减少。
3) eigen life of contact fatigue
接触疲劳特征寿命
4) High Tem-perature Contact Fatigue Life
高温接触疲劳寿命
5) gearing contact fatigue life
齿轮接触疲劳寿命
1.
When the viscosity surpasses a certain marginal value,gearing contact fatigue life decreases with an increment of viscosity.
通过热弹流润滑数值计算,分析了润滑油粘度对齿轮接触疲劳寿命的影响。
6) fatigue lifetime
疲劳寿命
1.
In this paper distribution function of roller chain fatigue lifetime are discussed and characteristic of Weibull distribution form parameter of fatigue lifetime that vary with its specification and loading are analyzed, then sampling inspection plan of lifetime of reliability and average lifetime are designes.
探讨了滚子链疲劳寿命的分布规律；揭示了滚子链疲劳寿命威布尔分布形状参数随链条规格、载荷水平变化的特点；设计了可靠寿命和平均寿命的抽样检验方案，从而为滚子链疲劳可靠性设计和验证提供了重要依
2.
Substituting this stress intensity factor into Paris expression obtained by experiment, a prediction of remaining fatigue lifetime for a sucker rod is calculated.
将此应力强度因子代入Paris公式,即可预测抽油杆的剩余疲劳寿命。
3.
Deviation of tradition fatigue lifetime prediction is bigger.
针对传统疲劳寿命预测误差较大的问题,提出了将隶属函数应用于疲劳寿命预测的新方法,并建立了基于隶属函数的疲劳寿命预测模型。
补充资料：疲劳寿命
分子式：
分子量：
CAS号：
性质：见疲劳性。
分子量：
CAS号：
性质：见疲劳性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条