1) minimum broken load
最小破断拉力
2) minimum breaking force coefficient
最小破断拉力系数
1.
The relationship between minimum breaking force and diameter is deduced from the relationship between minimum breaking force coefficient and diameter in ISO 8369,and the relation figure are drawn.
从国际标准ISO 8369中最小破断拉力系数与直径的关系出发,推导出最小破断拉力与直径的关系,并绘出关系图。
3) minimum tensile load
最小拉断力
1.
This paper presents the testing of wire rope in the reinforced flexible flat cable for minimum tensile load and suggestions for selection of the wire rope.
本文提出了加强型扁软电缆用钢丝绳“最小拉断力”的简易检测方案及选配建议。
4) broken pulling force
破断拉力
1.
It has close relation between broken pulling force of wire rope and tensile force value dispersed degree of steel wire for rope.
对国内 3家工厂和日本产 72A盘条进行试验并分析 ,钢丝绳的整绳破断拉力值和制绳钢丝拉力值的离散度有密切关系。
2.
In view of 35 mm steel wire rope breaking accident in a oil field, the breaking reason is analyzed by broken pulling force test.
针对某油田 35mm钢丝绳使用过程中的断绳事故 ,借助整绳破断拉力试验 ,对事故原因进行分析 ,认为事故发生前钢丝绳外层钢丝严重磨损和断丝是导致断绳的根源 ,钢丝绳直径显著减小是发生断绳事故的直接原因。
5) breaking force
破断拉力
1.
This paper gives a niethod for determing the relatlonship between diameter and nominal breaking force of API steel wire rope.
本文给出了确定API钢丝绳直径与其公称破断拉力值之间关系式的方法。
2.
The breaking force of suspender steel wire rope should be increased based on the assure of diameter and fatigue performance.
特大跨径悬索桥对钢丝绳吊索的要求越来越高,要求吊索钢丝绳在保证直径和抗疲劳能力的前提下提高其破断拉力。
6) minimum destructive force
最小破坏力
1.
Influences of the cross section structure and wall thickness of PVC profile materials on its minimum destructive force of welding angle;
PVC-U型材断面结构及壁厚对其焊接角最小破坏力的影响
补充资料：最小辐亮度与最小辐照度(见核爆炸火球)
最小辐亮度与最小辐照度(见核爆炸火球)
minimum-brightness and minimum-irradiance
zuixiao fuliangdu yu zuixiaofu乙haodu最小辐亮度与最小辐照度(minimum-brightness and而nimum一irradianee)见核爆炸火球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条