1) fiber volume fraction
纤维体积分数
1.
Effect of fiber volume fraction on friction and wear properties of C/C composites;
纤维体积分数对炭/炭复合材料摩擦磨损性能的影响
2.
Calculation of fiber volume fraction for multidirectional filament wound glass-fiber/epoxy tubes;
多向纤维缠绕玻璃钢管的纤维体积分数
3.
The relationships of the loop length, stitch density and thickness of fabrics to yarn linear density were analyzed with the experiment data, and the fiber volume fraction of glass fiber plain knitted fabrics was estimated theoretically.
通过对针织物结构参数的研究,分析了玻璃纤维针织物线圈长度、密度以及厚度与纱线线密度的关系,并从理论上推导了纬平针织物的纤维体积分数。
2) fibre volume fraction
纤维体积分数
1.
Effects of various fibre volume fraction on the performances of C/C composite;
纤维体积分数对炭/炭复合材料性能的影响
2.
In this paper, the effects of the fibre volume fraction on mechanical properties of K 3D/MCPA composites are presented.
本文研究了纤维体积分数对三维编织芳纶纤维增强铸性尼龙 (简称K3D MCPA)复合材料力学性能的影响。
3) fiber volume content
纤维体积分数
1.
Based on three group of integer felts with different fiber volume content were densified with CVD pyrolytic carbon, and a model of gas transport within a integer felt on the course of CVD process, the effect of carbon fiber volume content on the densification course of CVD (chemical vapor deposition) was investigated.
将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1。
2.
The geometry model formular is used to deduce the length of yarns,the oridentation angle of the nodulated yarns and the fiber volume content on some typical 2.
借助模型推导出纱线在几种典型结构(浅交弯联、浅交直联、深角联)的单元体结构内的纱线长度、接结经的取向角和纤维体积分数,并对材料进行拉伸、压缩性能预测。
4) volume fraction of fiber
纤维体积分数
1.
Effect of volume fraction of fiber in cement sheath on casing stress;
水泥环纤维体积分数对套管受力的影响
5) steel fiber content
钢纤维体积分数
6) volume fraction of carbon fiber
碳纤维体积分数
补充资料：临界纤维体积分数
分子式：
CAS号：
性质：能使纤维增强复合材料的抗张强度比纯聚合物基体的抗张强度有所增加时，所需加入纤维的最小体积分数。
CAS号：
性质：能使纤维增强复合材料的抗张强度比纯聚合物基体的抗张强度有所增加时，所需加入纤维的最小体积分数。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条