1) metal-paint part
金属涂漆零件
1.
Feasibility study on application of the XM-22B sealant on the metal-paint part bond;
XM-22B密封剂在金属涂漆零件粘接上的应用可行性研究
2) metal part
金属零件
1.
Research on surface finishing of metal part manufactured by HPDM;
HPDM直接制造金属零件的表面光整技术
2.
In this paper, a fundamental experiment was carried out for this new technology, a ANN model was introduced to predict and optimize the shape of plasma deposit, and based on these work, metal part was fabricated .
对等离子熔积成形技术做了初步的工艺试验研究,并采用人工神经网络对熔积层几何形貌进行了预测优化,最后成功地进行了金属零件的试制。
3.
By researching the effects of hybrid fabrication processing parameters on deposition formability,shaping features,thermal dry milling tools and the process,suitable processing parameters are found out and metal parts.
针对国内外现有的金属直接快速制造技术中存在的制件表面质量不高的瓶颈问题,开发了在制造过程中将等离子熔积增材成形与铣削光整减材复合的金属零件直接快速制造方法。
3) metallic part
金属零件
1.
The paper introduced briefly the development of Rapid Prototyping Technology and three methods of Laser Direct Manufacturing for metallic parts worldwide,further gave the develop- ment trend of Laser Direct Manufacturing for metallic parts.
介绍了快速原型制造技术的发展状况以及目前世界上激光直接制造金属零件的三种方法,指出了激光直接制造金属零件的未来发展趋势。
2.
A process that metallic parts are fabricated through selective laser sintering (SLS)prototype parts is researched.
主要研究了通过选择性激光烧结高分子原型件制造金属零件的工艺。
4) metallic components
金属零件
1.
Rapidly Digitized Manufacturing of Metallic Components;
金属零件的快速数字化制造
2.
Research and development on laser direct manufacturing metallic components;
激光熔覆快速制造金属零件研究与发展
3.
The latest achievements about laser direct rapid forming metallic components were summarized comprehensively.
综述了国内外激光直接快速成形金属零件的研究现状,重点介绍了该技术的成形机理、粉末送给方式和成形工艺的进展,提出了该技术存在的主要问题。
5) metal parts
金属零件
1.
Rapid Prototyping and Casting for Metal Parts and Metal Molds;
金属零件与金属模具的快速制造
2.
This paper analyzes the main factors affecting the laser cladding forming accuracy of metal parts, and puts forwards some suggestions on reducing the actions of these factors.
分析了影响激光熔覆成形金属零件精度的主要因素 ,提出了相应的解决办法。
3.
In most condition,analysis the damage reason of vehicle metal parts by surface observation method can get good results,it not only save time,but also can reduce maintain expensive,so,it deserves giving much more research on it.
大多数情况下,用表面观察法来分析和判断汽车金属零件损坏的原因,会收到事半功倍的效果,不仅省时省力,而且还能降低维修开支,值得探讨。
6) metallic parts
金属零件
1.
Rapid Casting of Metallic Parts Based on SLS Plastic Prototype;
基于SLS塑料原型的金属零件的快速铸造
补充资料：涂罩光漆
分子式：
CAS号：
性质：为增强涂层的光泽、丰满度，在涂装最后一道面漆后，再涂一层清漆罩光。如金属闪光涂料，在“湿碰湿”操作中，以两道金属闪光色漆作面漆，再涂装一道清漆罩光，一次烘干。
CAS号：
性质：为增强涂层的光泽、丰满度，在涂装最后一道面漆后，再涂一层清漆罩光。如金属闪光涂料，在“湿碰湿”操作中，以两道金属闪光色漆作面漆，再涂装一道清漆罩光，一次烘干。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条