1) oiled rice
涂油大米
2) oiling
[英][ɔil] [美][ɔɪl]
涂油
1.
Design of Auto-oiling Aluminum Foil Paper Control System for Cigarette Packer;
卷烟包装机铝箔纸自动涂油控制系统的设计
2.
Through the presentation of its structure, working principle, designing calculation and application are presented to indicate that such an oiler is oiler shows its safety and convenience in use, its accuraly and reliability in oiling and its effectiveness in the anti friction of the curve tracks and in the extension of the track life span so as to deserve a wide use in railways.
本文介绍一种经过省级鉴定的新型半机械化作业的曲线轨道涂油机的结构及工作原理、设计计算和应用情况。
3.
Tanning was completed in four steps:salt curing,a pickle solution,a tanning solution,and an oiling solution.
哺乳动物的皮张的鞣制主要由4步完成:盐化、腌制、鞣制、涂油。
3) nano ceramic coatings
纳米瓷膜涂料(石油气田管道用特种涂料)
5) nanostructured coating
纳米涂层
1.
It is shown that the nanostructured coating contains α-Al_2O_3,γ-Al_2O_3 and rutile TiO_2 phases,and has a microstructure consisting of fully melted columnar crystal region and partially melted nanostructured region.
研究了等离子喷涂特征参数(CPSP)对Al2O3-13wt%TiO2纳米涂层相组成、微观组织和性能的影响。
2.
Thermal sprayed nanostructured coating is one of the present promising fields in nanostructured coating.
热喷涂纳米涂层的研究是目前纳米涂层领域研究热点之一。
3.
The results show that the wear resistance of the nanostructured coating is better than that of the conventional coating, and the wear mechanism changes of these two kinds of coatings are different with the increase of the wearing load.
结果表明,纳米涂层的耐磨损性能明显好于传统陶瓷涂层,且随着磨损载荷的增大,纳米涂层和传统涂层的磨损机制的变化是不同的。
6) nano-coating
纳米涂料
1.
Current developments and future of nano-coatings;
纳米涂料的发展现状与未来
2.
Application and prospect of nano-coating in water supply system;
纳米涂料在供水系统中的应用现状与前景
3.
And then the characteristics and their development and research progress of several ultraviolet curing coatings including ultraviolet curing waterborne coatings,ultraviolet curing powder coatings,ultraviolet curing nano-coatings and ultraviolet curing super-branched coatings were also reviewed.
在此基础上,对几种新型UV固化涂料,如UV固化水性涂料、UV固化粉末涂料、UV固化纳米涂料和UV固化超支化聚合物涂料等的特点及国内外研究进展进行了综述,并指出UV固化涂料的发展方向。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条