1) friction stir welds
搅拌摩擦焊接接头
1.
Preparation technique on metallographic specimen of friction stir welds of dissimilar materials;
异种材料搅拌摩擦焊接接头金相试样的制备技术
3) friction stir welding
搅拌摩擦焊接
1.
Material flow patterns in friction stir welding;
搅拌摩擦焊接过程中材料流动形式
2.
Analysis of material deformations and residual stresses in friction stir welding;
搅拌摩擦焊接中材料变形及残余应力分析
3.
The material behavior analysis in joining non straight line weld by using friction stir welding;
搅拌摩擦焊接技术实现非直线焊缝过程中的材料行为分析
4) Friction welded joint
摩擦焊接头
1.
Effect of external electric field on diffusion behavior of copper andstainless steel friction welded joint during post weld annealing treat-ment;
电场热处理的铜与不锈钢摩擦焊接头扩散行为
2.
Failure analysis of friction welded joint of hollow sucker rod;
空心抽油杆摩擦焊接头断裂失效分析
3.
Based on reliability theory,the specification of accelerate life test for friction welded joints in boiler snake pipe was worked out.
通过对大量新制的 15CrMo摩擦焊接头的高温内压爆破持久试验 ,证明了试验规范的正确性和各组合应力水平的失效机理的一致性。
5) friction welded joints
摩擦焊接头
1.
Life forecast of friction welded joints based on stress-strength Interference model;
基于应力-强度干涉模型的摩擦焊接头寿命预测
2.
In this paper, a specification of multiple stresses accelerated life test for friction welded joints in boiler serpentine pipe was worked out.
研究制定了双应力的电站锅炉蛇形管焊接接头的加速寿命试验规范,在此规范基础上,对大量的15CrMo和12CrlMoV两种材料的摩擦焊接头进行了高温内压爆破持久强度试验。
3.
In order to defend the decrease of strength in heating affect zone (HAZ) of friction welded joints made of high strength steel, a new type inductor with magnetic yoke been developed.
针对高强钢摩擦焊接头焊后正火感应热处理加热区过宽产生的焊接接头软化失效问题 ,为窄化感应加热区宽度制作了磁轭式感应器 ;采用红外热成像技术实时检测高强钢钻杆摩擦焊接头焊后正火感应热处理过程的温度分布 ,评定了该感应器窄化感应加热区的效
6) friction stir weld
搅拌摩擦焊
1.
Investigation on defect dynamic echo waveform of friction stir welding;
搅拌摩擦焊焊缝缺陷的超声波动态波形分析
2.
The metal flowing behavior in weld zone has a great influence on the welds mechanical performance in friction stir welding.
搅拌摩擦焊中焊缝材料的流动对焊件性能有很大影响。
3.
The friction stir welding (FSW) of 5 mm thickness plates of 1060 Al/3003 Al was carried out.
搅拌摩擦焊中,材料的流动状态对焊件性能有很大影响。
补充资料：摩擦焊接
分子式：
CAS号：
性质：利用热塑性塑料之间相互摩擦所生成的摩擦热，使摩擦面受热熔融，经加压并冷却后，即可使其连接在一起的方法。有旋转摩擦焊接和振动摩擦焊接之分。一般的动摩擦系数大的焊接效率就高。
CAS号：
性质：利用热塑性塑料之间相互摩擦所生成的摩擦热，使摩擦面受热熔融，经加压并冷却后，即可使其连接在一起的方法。有旋转摩擦焊接和振动摩擦焊接之分。一般的动摩擦系数大的焊接效率就高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条